Comparison of free-surface and conservative Allen-Cahn phase-field lattice Boltzmann method
arXiv:2206.11637 · doi:10.1016/j.jcp.2022.111753
Abstract
This study compares the free-surface lattice Boltzmann method (FSLBM) with the conservative Allen-Cahn phase-field lattice Boltzmann method (PFLBM) in their ability to model two-phase flows in which the behavior of the system is dominated by the heavy phase. Both models are introduced and their individual properties, strengths and weaknesses are thoroughly discussed. Six numerical benchmark cases were simulated with both models, including (i) a standing gravity and (ii) capillary wave, (iii) an unconfined rising gas bubble in liquid, (iv) a Taylor bubble in a cylindrical tube, and (v) the vertical and (vi) oblique impact of a drop into a pool of liquid. Comparing the simulation results with either analytical models or experimental data from the literature, four major observations were made. Firstly, the PFLBM selected was able to simulate flows purely governed by surface tension with reasonable accuracy. Secondly, the FSLBM, a sharp interface model, generally requires a lower resolution than the PFLBM, a diffuse interface model. However, in the limit case of a standing wave, this was not observed. Thirdly, in simulations of a bubble moving in a liquid, the FSLBM accurately predicted the bubble's shape and rise velocity with low computational resolution. Finally, the PFLBM's accuracy is found to be sensitive to the choice of the model's mobility parameter and interface width.
References in corpus (12)
- Simulation of non-ideal gases and liquid-gas phase transitions by lattice Boltzmann equation
- Lattice Boltzmann Simulation of Non-Ideal Fluids
- waLBerla: A block-structured high-performance framework for multiphysics simulations
- Lattice Boltzmann Model for Axisymmetric Multiphase Flows
- Ternary free-energy entropic lattice Boltzmann model with high density ratio
- Oblique drop impact onto a deep liquid pool
- Curvature estimation from a volume of fluid indicator function for the simulation of surface tension and wetting with a free surface lattice Boltzmann method
- Moving Charged Particles in Lattice Boltzmann-Based Electrokinetics
- Dispersion and viscous attenuation of capillary waves with finite amplitude
- Analytic Solution to the Piecewise Linear Interface Construction Problem and its Application in Curvature Calculation for Volume-of-Fluid Simulation Codes
- Direct simulation of liquid-gas-solid flow with a free surface lattice Boltzmann method
- Adjoint Lattice Boltzmann for Topology Optimization on multi-GPU architecture