A Cryogenic Torsion Balance Using a Liquid-Cryogen Free, Ultra-Low Vibration Cryostat
arXiv:2206.02890 · doi:10.1063/5.0089933
Abstract
We describe a liquid-cryogen free cryostat with ultra-low vibration levels which allows for continuous operation of a torsion balance at cryogenic temperatures. The apparatus uses a commercially available two-stage pulse-tube cooler and passive vibration isolation. The torsion balance exhibits torque noise levels lower than room temperature thermal noise by a factor of about four in the frequency range of 3-10mHz, limited by residual seismic motion and by radiative heating of the pendulum body. In addition to lowering thermal noise below room-temperature limits, the low-temperature environment enables novel torsion balance experiments. Currently, the maximum duration of a continuous measurement run is limited by accumulation of cryogenic surface contamination on the optical elements inside the cryostat.
arXiv comment8 pages, 6 figures
References in corpus (6)
- Torsion-balance tests of the weak equivalence principle
- A Cryogenic Silicon Interferometer for Gravitational-wave Detection
- Very high quality factor measured in annealed fused silica
- A reference-beam autocollimator with nanoradian sensitivity from mHz to kHz and dynamic range of 10^7
- Molecular adsorbed layer formation on cooled mirrors and its impacts on cryogenic gravitational wave telescopes
- A Low-Frequency Torsion Pendulum with Interferometric Readout