paper

Tuning magnetocaloric effect by optimizing thickness induced 3D strain state

arXiv:2108.12640 · doi:10.1103/PhysRevB.104.224432

Abstract

The effect of 3-dimensional strain state on the magnetocaloric properties of epitaxial La0.8Ca0.2MnO3 (LCMO) thin films grown on two types of substrates, SrTiO3 (001) (STO) and LaAlO3 (001) (LAO) has been studied as a function of film thickness within the range of 25 to 300 nm. The STO substrate imposes an in-plane tensile biaxial strain while LAO substrate imposes an in-plane compressive biaxial strain. The in-plane biaxial strain on LCMO by STO substrate gets relaxed more rapidly than that by LAO substrate but both LCMO/STO and LCMO/LAO show a maximum entropy change of 12.1 J/Kg-K and 3.2 J/Kg-K, respectively at a critical thickness of 75 nm (at 6 T applied magnetic field). LCMO/LAO is found to exhibit a wider transition temperature region with full width at half maxima (FWHM) 40 K of the dM/dT vs T curve compared to LCMO/STO with FWHM 33 K of that curve. This broadening of the transition region indicates that the Table like magnetocaloric effect (MCE) is attainable by changing the strain type. The maximum Relative Cooling Power, 361 J/Kg of LCMO/STO and 339 J/Kg of LCMO/LAO is also observed at the thickness 75 nm. The Curie temperature varies with the thickness exploring the variation of ferromagnetic interaction strength due to strain relaxation. The film thickness and substrate induced lattice strain are proved to be the significant parameters for controlling MCE. The highest MCE response at a particular thickness shows the possibility of tuning MCE in other devices by optimizing thickness.

References in corpus (4)