Simulation of multi-species flow and heat transfer using physics-informed neural networks

Abstract

In the present work, single- and segregated-network PINN architectures are applied to predict momentum, species and temperature distributions of a dry air humidification problem in a simple 2D rectangular domain. The created PINN models account for variable fluid properties, species- and heat-diffusion and convection. Both the mentioned PINN architectures were trained using different hyperparameter settings, such as network width and depth to find the best-performing configuration. It is shown that the segregated-network PINN approach results in on-average 62% lower losses when compared to the single-network PINN architecture for the given problem. Furthermore, the single-network variant struggled to ensure species mass conservation in different areas of the computational domain, whereas, the segregated approach successfully maintained species conservation. The PINN predicted velocity, temperature and species profiles for a given set of boundary conditions were compared to results generated using OpenFOAM software. Both the single- and segregated-network PINN models produced accurate results for temperature and velocity profiles, with average percentage difference relative to the CFD results of approximately 7.5% for velocity and 8% for temperature. The mean error percentages for the species mass fractions are 9\% for the single-network model and 1.5% for the segregated-network approach. To showcase the applicability of PINNs for surrogate modelling of multi-species problems, a parameterised version of the segregated-network PINN is trained which could produce results for different water vapour inlet velocities. The normalised mean absolute percentage errors, relative to the OpenFOAM results, across three predicted cases for velocity and temperature are approximately 7.5% and 2.4% for water vapour mass fraction.

References in corpus (7)

• Adam: A Method for Stochastic Optimization
• Adaptive activation functions accelerate convergence in deep and physics-informed neural networks
• PPINN: Parareal Physics-Informed Neural Network for time-dependent PDEs
• Physics-informed deep learning for incompressible laminar flows
• Physics-Informed Neural Network for Modelling the Thermochemical Curing Process of Composite-Tool Systems During Manufacture
• Physics Informed Neural Networks for Simulating Radiative Transfer
• A deep learning framework for solution and discovery in solid mechanics

Cited by in corpus (10)

• Physics-informed PointNet: A deep learning solver for steady-state incompressible flows and thermal fields on multiple sets of irregular geometries
• Hybrid thermal modeling of additive manufacturing processes using physics-informed neural networks for temperature prediction and parameter identification
• Mixed formulation of physics-informed neural networks for thermo-mechanically coupled systems and heterogeneous domains
• Physics-informed neural network solution of thermo-hydro-mechanical (THM) processes in porous media
• Inverse modeling of nonisothermal multiphase poromechanics using physics-informed neural networks
• Physics-informed data based neural networks for two-dimensional turbulence
• Low-temperature plasma simulation based on physics-informed neural networks: frameworks and preliminary applications
• A Framework Based on Symbolic Regression Coupled with eXtended Physics-Informed Neural Networks for Gray-Box Learning of Equations of Motion from Data
• Numerical modeling and simulation on nanosecond laser-target interactions
• FlexPINN: Modeling Fluid Dynamics and Mass Transfer in 3D Micromixer Geometries Using a Flexible Physics-Informed Neural Network