Comprehensive topography characterization of polycrystalline diamond coatings

Abstract

The surface topography of diamond coatings strongly affects surface properties such as adhesion, friction, wear, and biocompatibility. However, the understanding of multi-scale topography, and its effect on properties, has been hindered by conventional measurement methods, which capture only a single length scale. Here, four different polycrystalline diamond coatings are characterized using transmission electron microscopy to assess the roughness down to the sub-nanometer scale. Then these measurements are combined, using the power spectral density (PSD), with conventional methods (stylus profilometry and atomic force microscopy) to characterize all scales of topography. The results demonstrate the critical importance of measuring topography across all length scales, especially because their PSDs cross over one another, such that a surface that is rougher at a larger scale may be smoother at a smaller scale and vice versa. Furthermore, these measurements reveal the connection between multi-scale topography and grain size, with characteristic scaling behavior at and slightly below the mean grain size, and self-affine fractal-like roughness at other length scales. At small (subgrain) scales, unpolished surfaces exhibit a common form of residual roughness that is self-affine in nature but difficult to detect with conventional methods. This approach of capturing topography from the atomic- to the macro-scale is termed comprehensive topography characterization, and all of the topography data from these surfaces has been made available for further analysis by experimentalists and theoreticians. Scientifically, this investigation has identified four characteristic regions of topography scaling in polycrystalline diamond materials.

arXiv comment13 pages, 6 figures

References in corpus (10)

• On the nature of surface roughness with application to contact mechanics, sealing, rubber friction and adhesion
• Quantitative characterization of surface topography using spectral analysis
• Finite-element analysis of contact between elastic self-affine surfaces
• Stochastic models which separate fractal dimension and Hurst effect
• When are rough surfaces sticky?
• The effect of surface roughness on the adhesion of elastic solids
• From infinitesimal to full contact between rough surfaces: evolution of the contact area
• Theory of adhesion: role of surface roughness
• Linking energy loss in soft adhesion to surface roughness
• The universal emergence of self-affine roughness from deformation

Cited by in corpus (3)

• Scale-dependent roughness parameters for topography analysis
• Dependence of Adhesive Friction on Surface Roughness and Elastic Modulus
• contact.engineering -- Create, analyze and publish digital surface twins from topography measurements across many scales