paper

Investigation of passive flow control over an airfoil using leading edge tubercles

arXiv:2103.08854 · doi:10.1615/JFlowVisImageProc.2022040289

Abstract

The present paper numerically investigates flow control over NACA0021 (National Advisory Committee for Aeronautics) airfoil by applying a leading-edge tubercle as a passive flow control device at transitional Reynolds number (Re) regime. The study includes simulations over the unmodified airfoil and modified airfoil operating at Re=120000 using kT-kL-ω based Delayed Detached Eddy Simulation (DDES) model. The calculations include both the pre-stall and post-stall regions, while the performance of the mean flow aerodynamic properties like pressure, lift, skin-friction, and drag coefficients are also investigated in the presence of tubercles. The spanwise flow over the modified airfoil interacts with the primary flow. The turbulent separation gets delayed compared to the unmodified airfoil, thereby significantly improving the stall behavior and flow behavior in the post-stall region. The modified airfoil provides the gradual stall behavior against the steep stall behavior for the unmodified airfoil. To optimize tubercle configuration, the study considers two modified airfoils with different combinations of amplitude and wavelength. The unsteady analysis, including the reduced-order modeling, i.e. 3D Proper orthogonal decomposition (POD), characterizes the dominant vortical structure of the flow to evaluate the improvement in the aerodynamic performance of the modified airfoil. The model decomposition for flow over airfoil helps to provide a deeper understanding of the flow control phenomenon.

References in corpus (10)