Simulating the radiation loss of superconducting submillimeter wave filters and transmission lines using Sonnet EM
arXiv:2012.07251 · doi:10.1117/12.2560458
Abstract
Superconducting resonators and transmission lines are fundamental building blocks of integrated circuits for millimeter-submillimeter astronomy. Accurate simulation of radiation loss from the circuit is crucial for the design of these circuits because radiation loss increases with frequency, and can thereby deteriorate the system performance. Here we show a stratification for a 2.5-dimensional method-of-moment simulator Sonnet EM that enables accurate simulations of the radiative resonant behavior of submillimeter-wave coplanar resonators and straight coplanar waveguides (CPWs). The Sonnet simulation agrees well with the measurement of the transmission through a coplanar resonant filter at 374.6 GHz. Our Sonnet stratification utilizes artificial lossy layers below the lossless substrate to absorb the radiation, and we use co-calibrated internal ports for de-embedding. With this type of stratification, Sonnet can be used to model superconducting millimeter-submillimeter wave circuits even when radiation loss is a potential concern.
arXiv commentPresented at the SPIE Astronomical Telescopes + Instrumentation 2020. Full published paper, poster and video available at https://doi.org/10.1117/12.2560458
References in corpus (5)
- Reducing intrinsic loss in superconducting resonators by surface treatment and deep etching of silicon substrates
- A dual-band millimeter-wave kinetic inductance camera for the IRAM 30-meter telescope
- Multiplexed Readout for 1000-pixel Arrays of Microwave Kinetic Inductance Detectors
- Crosstalk Reduction for Superconducting Microwave Resonator Arrays
- Suppression of radiation loss in high kinetic inductance superconducting co-planar waveguides