Simultaneous Spark Plasma Sintering of Multiple Complex Shapes
arXiv:2011.10765 · doi:10.3390/ma12040557
Abstract
This work addresses the two great challenges of the spark plasma sintering (SPS) process: the sintering of complex shapes and the simultaneous production of multiple parts. A new controllable interface method is employed to concurrently consolidate two nickel gear shapes by SPS. A graphite deformable sub-mold is specifically designed for the mutual densification of the both complex parts in a unique 40 mm powder deformation space. An energy efficient SPS configuration is developed to allow the sintering of a large-scale powder assembly under electric current lower than 900 A. The stability of the developed process is studied by electro-thermal-mechanical (ETM) simulation. The ETM simulation reveals that homogeneous densification conditions can be attained by inserting an alumina powder at the sample/punches interfaces enabling the energy efficient heating and the thermal confinement of the nickel powder. Finally, the feasibility of the fabrication of the two near net shape gears with a very homogeneous microstructure is demonstrated.
References in corpus (4)
- All-Materials-Inclusive Flash Spark Plasma Sintering
- Porosity dependence of powder compaction constitutive parameters: Determination based on spark plasma sintering tests
- Proportional integral derivative, modeling and ways of stabilization for the spark plasma sintering process
- Energy efficient spark plasma sintering: Breaking the threshold of large dimension tooling energy consumption