3D modeling of a Superconducting Dynamo-Type Flux Pump
arXiv:2011.00989 · doi:10.1038/s41598-021-89596-4
Abstract
High temperature superconducting (HTS) dynamos are promising devices that can inject large DC currents into the winding of superconducting machines or magnets in a contactless way. Thanks to this, troublesome brushes in HTS machines or bulky currents leads with high thermal losses will be no longer required. The working mechanism of HTS dynamo has been controversial during the recent years and several explanations and models have been proposed to elucidate its performance. In this paper, we present the first three-dimensional (3D) model of an HTS flux pump, which has good agreement with experiments. This model can be beneficial to clarify the mechanism of the dynamo and pinpoint its unnoticed characteristics. Employing this model, we delved into the screening current and electric field distribution across the tape surface in several crucial time steps. This is important, since the overcritical screening current has been shown to be the reason for flux pumping. In addition, we analyzed the impact of both components of electric field and screening current on voltage generation, which was not possible in previous 2D modeling. We also explored the necessary distance of voltage tab at different airgaps for precise measurement of the voltage across the tape in the dynamo.
arXiv comment20 pages; 9 figures; style and minor changes from v01
References in corpus (11)
- Computation of Losses in HTS Under the Action of Varying Magnetic Fields and Currents
- Superconducting Magnetic Bearings Simulation using an H-formulation Finite Element Model
- A finite element method framework for modeling rotating machines with superconducting windings
- T-A Formulation to Model Electrical Machines with HTS Coated Conductor Coils
- A new benchmark problem for electromagnetic modelling of superconductors: the high-Tc superconducting dynamo
- 3D computation of non-linear eddy currents: variational method and superconducting cubic bulk
- Modeling of Airgap Influence on DC Voltage Generation in a Dynamo-Type Flux Pump
- Demagnetization of cubic Gd-Ba-Cu-O bulk superconductor by cross-fields: measurements and 3D modelling
- Cross-field demagnetization of stacks of tapes: 3D modelling and measurements
- 3D modelling of macroscopic force-free effects in superconducting thin films and rectangular prisms
- Two-dimensional model of a high-Tc superconducting dynamo