Very low resistance Al/Cu joints for use at cryogenic temperatures

Abstract

We present two different techniques for achieving low resistance ($<$20 n$\mathrm{\Omega }$) contacts between copper and aluminium at cryogenic temperatures. The best method is based on gold plating of the surfaces in an e-beam evaporator immediately after Ar plasma etching in the same apparatus, yielding resistances as low as 3 n$\mathrm{\Omega }$ that are stable over time. The second approach involves inserting indium in the Al/Cu joint. For both methods, we believe key elements are surface polishing, total removal of the aluminum oxide surface layer, and temporary application of large (typ. 11 kN) compression forces. We believe the values for gold plated contacts are the lowest ever reported for a Cu/Al joint of a few $\mathrm{c}{\mathrm{m}}^2$. This technology could simplify the construction of thermal links for advanced cryogenics applications, in particular that of extremely low resistance heat switches for nuclear demagnetization refrigerators.

arXiv commentAccepted by Journal of Low Temperature Physics

References in corpus (5)

• Dry demagnetization cryostat for sub-millikelvin helium experiments: refrigeration and thermometry
• A microkelvin cryogen-free experimental platform with integrated noise thermometry
• Cryogenic broadband vibration measurement on a cryogen-free dilution refrigerator
• Design Evaluation of Serial and Parallel sub-mK Continuous Nuclear Demagnetization Refrigerators
• Development of a sub-mK Continuous Nuclear Demagnetization Refrigerator

Cited by in corpus (1)

• Superconducting aluminum heat switch with 3 n$\Omega$ equivalent resistance