Numerical Modeling and Experimental Demonstration of Pulsed Charge Control for the Space Inertial Sensor used in LISA
arXiv:2005.00917 · doi:10.1103/PhysRevD.102.042002
Abstract
Electrostatic charge control of isolated free-falling test masses is a key enabling technology for space-based gravitational missions. Contact-free electrostatic charge control can be achieved using photoelectron emission from metal surfaces under illumination with deep UV light. A contact-free method minimizes force disturbances that can perturb measurements or interrupt science operations. In this paper we present charge control experiments using a gravitational reference sensor geometry relevant to the Laser Interferometer Space Antenna (LISA) gravitational wave observatory in a torsion pendulum apparatus. We use a UV LED light source to control the test mass potential, taking advantage of their high bandwidth to phase-lock the light output to 100kHz electric fields used for capacitive position sensing of the test mass. We demonstrate charge-rate and test mass potential control by adjustment of the phase of the light with respect to the electric field. We present a simple physics-based model of the discharging process which explains our experimental results in terms of the UV light distribution in the sensor, surface work functions and quantum yields. A robust fitting method is used to determine the best-fit physical parameters of the model that describe the system
References in corpus (15)
- emcee: The MCMC Hammer
- TianQin: a space-borne gravitational wave detector
- Laser Interferometer Space Antenna
- The MICROSCOPE mission: first results of a space test of the Equivalence Principle
- Charge-induced force-noise on free-falling test masses: results from LISA Pathfinder
- Detailed Calculation of Test-Mass Charging in the LISA Mission
- The interaction between stray electrostatic fields and a charged free-falling test mass
- Precision Charge Control for Isolated Free-Falling Test Masses: LISA Pathfinder Results
- Charge Induced Acceleration Noise in the LISA Gravitational Reference Sensor
- A New Torsion Pendulum for Gravitational Reference Sensor Technology Development
- Characterising and Testing Deep UV LEDs for Use in Space Applications
- Effective decrease of photoelectric emission threshold from gold plated surfaces
- Ground Testing and Flight Demonstration of Charge Management of Insulated Test Masses Using UV LED Electron Photoemission
- Energy distribution and quantum yield for photoemission from air-contaminated gold surfaces under UV illumination close to the threshold
- Lifetime Testing UV LEDs for Use in the LISA Charge Management System
Cited by in corpus (4)
- Bridging the gap between Monte Carlo simulations and measurements of the LISA Pathfinder test-mass charging for LISA
- A Simplified Gravitational Reference Sensor for Satellite Geodesy
- Low-energy electromagnetic processes affecting free-falling test-mass charging for LISA and future space interferometers
- Estimation of the electrostatic effects in the LISA-Pathfinder critical test mass dynamics via the method of moments