paper

Enhancing LIDAR performance metrics using continuous-wave photon-pair sources

arXiv:2004.06754 · doi:10.1364/OPTICA.6.001349

Abstract

In order to enhance LIDAR performance metrics such as target detection sensitivity, noise resilience and ranging accuracy, we exploit the strong temporal correlation within the photon pairs generated in continuous-wave pumped semiconductor waveguides. The enhancement attained through the use of such non-classical sources is measured and compared to a corresponding target detection scheme based on simple photon-counting detection. The performances of both schemes are quantified by the estimation uncertainty and Fisher information of the probe photon transmission, which is a widely adopted sensing figure of merit. The target detection experiments are conducted with high probe channel loss (\(\simeq 1-5\times10^{-5}\)) and formidable environment noise up to 36 dB stronger than the detected probe power of \(1.64\times 10^{-5}\) pW. The experimental result shows significant advantages offered by the enhanced scheme with up to 26.3 dB higher performance in terms of estimation uncertainty, which is equivalent to a reduction of target detection time by a factor of 430 or 146 (21.6 dB) times more resilience to noise. We also experimentally demonstrated ranging with these non-classical photon pairs generated with continuous-wave pump in the presence of strong noise and loss, achieving \(\approx\)5 cm distance resolution that is limited by the temporal resolution of the detectors.

References in corpus (14)

Cited by in corpus (22)