Validated two-dimensional modeling of short carbon arcs: anode and cathode spots
arXiv:2004.06062 · doi:10.1063/5.0011044
Abstract
In order to study properties of short carbon arcs, a self-consistent model was implemented into a CFD code ANSYS-CFX. The model treats transport of heat and electric current in the plasma and the electrodes in a coupled manner and accounts for gas convection in the chamber. Multiple surface processes at the electrodes are modeled, including the formation of space-charge limited sheaths, ablation and deposition of carbon, emission and absorption of radiation and electrons. The simulations show that the arc is constricted near the cathode and the anode front surfaces leading to the formation of electrode spots. The cathode spot is a well-known phenomenon and mechanisms of its formation were reported elsewhere. However, the anode spot formation mechanism discovered in this work was not reported before. We conclude that the spot formation is not related to plasma instability, as commonly believed in case of constricted discharge columns, but rather occurs due to the highly nonlinear nature of heat balance in the anode. We additionally demonstrate this property with a reduced anode heat transfer model. We also show that the spot size increases with the arc current. This anode spot behavior was also confirmed in our experiments. Due to the anode spot formation, a large gradient of carbon gas density occurs near the anode, which drives a portion of the ablated carbon back to the anode at its periphery. This can consequently reduce the total ablation rate. Simulation results also show that the arc can reach local chemical equilibrium (LCE) state in the column region while the local thermal equilibrium (LTE) state is not typically achieved for experimental conditions. It shows that it is important to account for different electron and gas temperatures in the modeling of short carbon arcs.
References in corpus (9)
- Investigation of a short argon arc with hot anode. Part I: numerical simulations of non-equilibrium effects in the near-electrode regions
- Complex structure of the carbon arc discharge for synthesis of nanotubes
- Investigation of the Short Argon Arc with Hot Anode, Part II: Analytical Model
- Nanoparticles growth in dynamic plasma
- Synthesis of nanoparticles in carbon arc: measurements and modeling
- 3D modelling of self-organized patterns of spots on anodes of DC glow discharge
- Quantitative imaging of carbon dimer precursor for nanomaterial synthesis in the carbon arc
- Migration of a Carbon Adatom on a Charged Single-Walled Carbon Nanotube
- Model of a transition from low to high ablation regime in a carbon arc