Ultra-low radioactivity Kapton and copper-Kapton laminates
arXiv:1910.04317 · doi:10.1016/j.nima.2020.163573
Abstract
Polyimide-based materials, like Kapton, are widely used in flexible cables and circuitry due to their unique electrical and mechanical characteristics. This study is aimed at investigating the radiopurity of Kapton for use in ultralow background, rare-event physics applications by measuring the U, Th, and K levels using inductively coupled plasma mass spectrometry. Commercial-off-the-shelf Kapton varieties, measured at approximately 950 and 120 pg/g U and Th (1.210 and 490 Bq/kg), respectively, can be a significant background source for many current and next-generation ultralow background detectors. This study has found that the dominant contamination is due to the use of dicalcium phosphate (DCP), a nonessential slip additive added during manufacturing. Alternative Kapton materials were obtained that did not contain DCP and were determined to be significantly more radiopure than the commercially-available options with 12 and 19 pg/g U and Th (150 and 77 Bq/kg), respectively. The lowest radioactivity version produced (Kapton ELJ, which contains an adhesive) was found to contain single digit pg/g levels of U and Th, two-to-three orders of magnitude cleaner than commercial-off-the-shelf options. Moreover, copper-clad polyimide laminates employing Kapton ELJ as the insulator were obtained and shown to be very radiopure at 8.6 and 22 pg/g U and Th (110 and 89 Bq/kg), respectively.
10 pages, 1 figure, 6 tables
References in corpus (8)
- Search for low-mass WIMPs in a 0.6 kg day exposure of the DAMIC experiment at SNOLAB
- Systematic study of trace radioactive impurities in candidate construction materials for EXO-200
- Performance of the EDELWEISS-III experiment for direct dark matter searches
- The Nylon Scintillator Containment Vessels for the Borexino Solar Neutrino Experiment
- Radiopurity assessment of the tracking readout for the NEXT double beta decay experiment
- Radiopurity assessment of the energy readout for the NEXT double beta decay experiment
- A liquid xenon ionization chamber in an all-fluoropolymer vessel
- Low Background Materials and Fabrication Techniques for Cables and Connectors in the Majorana Demonstrator