Comparison of wave-structure interaction dynamics of a submerged cylindrical point absorber with three degrees of freedom using potential flow and computational fluid dynamics models

Abstract

In this paper we compare the heave, surge, and pitch dynamics of a submerged cylindrical point absorber, simulated using potential flow and fully-resolved computational fluid dynamics (CFD) models. The potential flow model is based on the time-domain Cummins equation, whereas the CFD model uses the fictitious domain Brinkman penalization (FD/BP) technique. The submerged cylinder is tethered to the seabed using a power take-off (PTO) unit which restrains the heave, surge, and pitch motions of the converter, and absorbs energy from all three modes. It is demonstrated that the potential theory over-predicts the amplitudes of heave and surge motions, whereas it results in an insignificant pitch for a fully-submerged axisymmetric converter. It also under-estimates the slow drift of the buoy, which the CFD model is able to capture reliably. Further, we use fully-resolved CFD simulations to study the performance of a three degrees of freedom (DOF) cylindrical buoy under varying PTO coefficients, mass density of the buoy, and incoming wave heights. It is demonstrated that the PTO coefficients predicted by the linear potential theory are sub-optimal for waves of moderate and high steepness. The wave absorption efficiency improves significantly when higher than the predicted value of the PTO damping is selected. Simulations with different mass densities of the buoy show that converters with low mass densities have an increased tension in their PTO and mooring lines. Moreover, the mass density also influences the range of resonance periods of the device. Finally, simulations with different wave heights show that at higher heights, the wave absorption efficiency of the converter decreases and a large portion of available wave power remains unabsorbed.

arXiv commentFinal published version

References in corpus (6)

• A robust incompressible Navier-Stokes solver for high density ratio multiphase flows
• A DLM immersed boundary method based wave-structure interaction solver for high density ratio multiphase flows
• Simulating water-entry/exit problems using Eulerian-Lagrangian and fully-Eulerian fictitious domain methods within the open-source IBAMR library
• Efficient Variable-Coefficient Finite-Volume Stokes Solvers
• A stable partitioned FSI algorithm for rigid bodies and incompressible flow. Part I: Model problem analysis
• A stable added-mass partitioned (AMP) algorithm for elastic solids and incompressible flow

Cited by in corpus (7)

• The inertial sea wave energy converter (ISWEC) technology: device-physics, multiphase modeling and simulations
• An adaptive and energy-maximizing control of wave energy converters using extremum-seeking approach
• A model predictive control (MPC)-integrated multiphase immersed boundary (IB) framework for simulating wave energy converters (WECs)
• Preventing mass loss in the standard level set method: New insights from variational analyses
• Critique on "Volume penalization for inhomogeneous Neumann boundary conditions modeling scalar flux in complicated geometry"
• An effective preconditioning strategy for volume penalized incompressible/low Mach multiphase flow solvers
• Handling Neumann and Robin boundary conditions in a fictitious domain volume penalization framework