The influence of surface roughness on the rheology of immersed and dry frictional spheres
arXiv:1904.12633 · doi:10.1103/PhysRevFluids.4.104302
Abstract
Pressure-imposed rheometry is used to examine the influence of surface roughness on the rheology of immersed and dry frictional spheres in the dense regime. The quasi-static value of the effective friction coefficient is not significantly affected by particle roughness while the critical volume fraction at jamming decreases with increasing roughness. These values are found to be similar in immersed and dry conditions. Rescaling the volume fraction by the maximum volume fraction leads to collapses of rheological data on master curves. The asymptotic behaviors are examined close to the jamming transition.
References in corpus (13)
- Rheophysics of dense granular materials : Discrete simulation of plane shear flows
- Jamming, Force Chains and Fragile Matter
- Shear thickening, frictionless and frictional rheologies in non-Brownian suspensions
- Bridging the rheology of granular flows in three regimes
- Transition from viscous to inertial regime in dense suspensions
- Frictionless bead packs have macroscopic friction, but no dilatancy
- A unified framework for non-Brownian suspension flows and soft amorphous solids
- Unified Theory of Inertial Granular Flows and Non-Brownian Suspensions
- Shear flow of non-Brownian suspensions close to jamming
- Flow regime transitions in dense non-Brownian suspensions: rheology, microstructural characterisation and constitutive modelling
- Phase Diagram for Inertial Granular Flows
- Effect of Friction on Dense Suspension Flows of Hard Particles
- Crossover from negative to positive shear rate dependence in granular friction
Cited by in corpus (13)
- Viscous-inertial transition in dense granular suspension
- Viscometric flow of dense granular materials under controlled pressure and shear stress
- Rheology of mobile sediment beds sheared by viscous, pressure-driven flows
- Rheology of mobile sediment beds in laminar shear flow: effects of creep and polydispersity
- Deposition of a particle-laden film on the inner wall of a tube
- Integration through transients approach to the rheology
- Getting jammed in all directions: Dynamic shear jamming around a cylinder towed through a dense suspension
- Rheology of granular liquids in extensional flows: Beyond the -law
- Probing dissipation in spreading drops with granular suspensions
- Non-monotonic constitutive curves and shear banding in dry and wet granular flows
- Vane rheology of a fiber-reinforced granular material
- Characterizing the surface texture of a dense suspension undergoing dynamic jamming
- Granular aqueous suspensions with controlled inter-particular friction and adhesion