Start-up flow in shallow deformable microchannels

Abstract

Microfluidic systems are usually fabricated with soft materials that deform due to the fluid stresses. Recent experimental and theoretical studies on the steady flow in shallow deformable microchannels have shown that the flow rate is a nonlinear function of the pressure drop due to the deformation of the upper soft wall. Here, we extend the steady theory of Christov et al. (2018) by considering the start-up flow from rest, both in pressure-controlled and in flow-rate-controlled configurations. The characteristic scales and relevant parameters governing the transient flow are first identified, followed by the development of an unsteady lubrication theory assuming that the inertia of the fluid is negligible, and that the upper wall can be modeled as an elastic plate under pure bending satisfying the Kirchhoff-Love equation. The model is governed by two non-geometrical dimensionless numbers: a compliance parameter $\beta$, which compares the characteristic displacement of the upper wall with the undeformed channel height, and a parameter $\gamma$ that compares the inertia of the solid with its flexural rigidity. In the limit of negligible solid inertia, $\gamma \to 0$, a quasi-steady model is developed, whereby the fluid pressure satisfies a nonlinear diffusion equation, with $\beta$ as the only parameter, which admits a self-similar solution under pressure-controlled conditions. This simplified lubrication description is validated with coupled three-dimensional numerical simulations of the Navier equations for the elastic solid and the Navier-Stokes equations for the fluid. The agreement is very good when the hypotheses behind the model are satisfied. Unexpectedly, we find fair agreement even in cases where the solid and liquid inertia cannot be neglected.

arXiv comment26 pages and 8 figures, submitted to Journal of Fluid Mechanics

References in corpus (7)

• Bacterial hydrodynamics
• Flow rate--pressure drop relation for deformable shallow microfluidic channels
• Viscous control of peeling an elastic sheet by bending and pulling
• Noninvasive Measurement of the Pressure Distribution in a Deformable Micro-Channel
• Bubbles dynamics in microchannels: inertial and capillary migration forces
• Axial Creeping Flow in the Gap between a Rigid Cylinder and a Concentric Elastic Tube
• Bubbles dissolution in cylindrical microchannels

Cited by in corpus (14)

• Soft hydraulics: from Newtonian to complex fluid flows through compliant conduits
• Theory of the flow-induced deformation of shallow compliant microchannels with thick walls
• Transient compressible flow in a compliant viscoelastic tube
• Unsteady fluid--structure interactions in a soft-walled microchannel: A one-dimensional lubrication model for finite Reynolds number
• Hydrodynamic Bulge Testing: Materials Characterization without Measuring Deformation
• Flow rate-pressure drop relations for shear-thinning fluids in deformable configurations: theory and experiments
• Reduced modelling and global instability of finite-Reynolds-number flow in compliant rectangular channels
• Intermittent air invasion in pervaporating compliant microchannels
• Sixth-order parabolic equation on an interval: Eigenfunction expansion, Green's function, and intermediate asymptotics for a finite thin film with elastic resistance
• An electrokinetic route to giant augmentation in load bearing capacity of compliant microfluidic channels
• Orthonormal eigenfunction expansions for sixth-order boundary value problems
• Oscillatory flows in three-dimensional deformable microchannels
• Soft Hydraulics in Channels with Thick Walls: The Finite-Reynolds-Number Base State and Its Stability
• Flow rate-pressure drop relation for deformable channels via fluidic and elastic reciprocal theorems