Characterization of Gadolinium-loaded Plastic Scintillator for Use as a Neutron Veto
arXiv:1812.11267
Abstract
Scintillator doped with a high neutron-capture cross-section material can be used to detect neutrons via their resulting gamma rays. Examples of such detectors using liquid scintillator have been successfully used in high-energy physics experiments. However, a liquid scintillator can leak and is not as amenable to modular or complex shapes as a solid scintillator. Polystyrene-based scintillators from a variety of gadolinium compounds with varying concentrations were polymerized in our laboratory. The light output, emission spectra, and attenuation length of our samples were measured and light collection strategies using a wavelength shifting (WLS) fiber were evaluated. The measured optical parameters were used to tune a Geant4-based optical Monte Carlo, enabling the trapping efficiency to be calculated. This technology was also evaluated as a possible neutron veto for the direct detection dark matter experiment, Super Cryogenic Dark Matter Search (SuperCDMS).
References in corpus (7)
- Solar neutrino results in Super-Kamiokande-III
- Projected Sensitivity of the SuperCDMS SNOLAB experiment
- DarkSide-50 532-day Dark Matter Search with Low-Radioactivity Argon
- First evidence of pep solar neutrinos by direct detection in Borexino
- Low Energy Threshold Analysis of the Phase I and Phase II Data Sets of the Sudbury Neutrino Observatory
- Measurement of the 8B Solar Neutrino Flux with the KamLAND Liquid Scintillator Detector
- Quenching Factor for Low Energy Nuclear Recoils in a Plastic Scintillator