Swept-wavelength mid-infrared fiber laser for real-time ammonia gas sensing
arXiv:1812.08298 · doi:10.1063/1.5065415
Abstract
The mid-infrared (mid-IR) spectral region holds great promise for new laser-based sensing technologies, based on measuring strong mid-IR molecular absorption features. Practical applications have been limited to date, however, by current low-brightness broadband mid-IR light sources and slow acquisition-time detection systems. Here, we report a new approach by developing a swept-wavelength mid-infrared fiber laser, exploiting the broad emission of dysprosium and using an acousto-optic tunable filter to achieve electronically controlled swept-wavelength operation from 2.89 to 3.25 μm (3070-3460 cm^-1). Ammonia (NH3) absorption spectroscopy is demonstrated using this swept source with a simple room-temperature single-pixel detector, with 0.3 nm resolution and 40 ms acquisition time. This creates new opportunities for real-time high-sensitivity remote sensing using simple, compact mid-IR fiber-based technologies.
arXiv commentInvited article for APL Photonics
References in corpus (9)
- Mid-infrared frequency combs
- Frequency-agile dual-comb spectroscopy
- High Coherence Mid-Infrared Dual Comb Spectroscopy Spanning 2.6 to 5.2 microns
- Versatile and widely tunable mid-infrared erbium doped ZBLAN fiber laser
- Dysprosium-doped ZBLAN fiber laser tunable from 2.8 μm to 3.4 μm, pumped at 1.7 μm
- Emission beyond 4 μm and mid-infrared lasing in a dysprosium-doped indium fluoride (InF3) fiber
- Watt-level dysprosium fiber laser at 3.15 μm with 73% slope efficiency
- Mode-locked dysprosium fiber laser: picosecond pulse generation from 2.97 to 3.30 μm
- Multiple-octave spanning mid-IR supercontinuum generation in bulk quadratic nonlinear crystals
Cited by in corpus (5)
- Dysprosium mid-infrared lasers: current status and future prospects
- Q-switched Dy:ZBLAN fiber lasers beyond 3 μm: comparison of pulse generation using acousto-optic modulation and inkjet-printed black phosphorus
- Mode-locked and tunable fiber laser at the 3.5 m band using frequency-shifted feedback
- Self-sweeping ytterbium-doped fiber laser based on a fiber saturable absorber
- Fiber-based mid-infrared frequency-swept laser at 50 MScans/s via frequency down-conversion of time-stretched pulses