Passive optical gyroscope with double homodyne readout

Abstract

We present a passive, resonant, single-frequency gyroscope design that utilises polarisation modes of an optical cavity to readout rotation and generate a laser frequency discriminant. This design is notable for its simplicity, requiring no modulation electronics or frequency counters. We extract both the cavity length signal and rotation signal from two co-propagating beams with orthogonal polarisations. This readout scheme can be applied to an optical cavity whose polarisation eigen-modes experience different phase shifts such as fibre rings; whispering gallery mode resonators; and folded free-space cavities. We apply this technique to the passive free-space gyroscope and achieve a bias stability of 0.03 degree/h and a sensitivity of $5\times 10^{-8}$ rad/sqHz above 1 Hz, with a cavity of area 400 cm^2 and finesse of 10^4. Below 1 Hz the sensitivity of the gyroscope is limited by the backscattering in the optical cavity and beam jitter of the laser beam.

References in corpus (4)

• A high-precision mechanical absolute-rotation sensor
• Prospects for detecting gravitational waves at 5 Hz with ground-based detectors
• Passive, free-space laser gyroscope
• Simple method for locking birefringent resonators

Cited by in corpus (7)

• Analysis of ring laser gyroscopes including laser dynamics
• Quantum-enhanced interferometry for axion searches
• Reaching the sensitivity limit of a Sagnac gyroscope through linear regression analysis
• Active platform stabilisation with a 6D seismometer
• A six degree-of-freedom fused silica seismometer: Design and tests of a metal prototype
• 3 m$\times$3 m heterolithic passive resonant gyroscope with cavity length stabilization
• A vertical inertial sensor with interferometric readout