A two-phase mixing layer between parallel gas and liquid streams: multiphase turbulence statistics and influence of interfacial instability
arXiv:1808.01996 · doi:10.1017/jfm.2018.825
Abstract
The two-phase mixing layer formed between parallel gas and liquid streams is an important fundamental problem in turbulent multiphase flows. The problem is relevant to many industrial applications and natural phenomena, such as air-blast atomizers in fuel injection systems and breaking waves in the ocean. The velocity difference between the gas and liquid streams triggers an interfacial instability which can be convective or absolute depending on the stream properties and injection parameters. In the present study, a direct numerical simulation of a two-phase gas-liquid mixing layer that lie in the absolute instability regime is conducted. A dominant frequency is observed in the simulation and the numerical result agrees well with the prediction from viscous stability theory. As the interfacial wave plays a critical role in turbulence transition and development, the temporal evolution of turbulent fluctuations (such as the enstrophy) also exhibits a similar frequency. In order to investigate the statistical response of the multiphase turbulence flow, the simulation has been run for a long physical time so that time-averaging can be performed to yield the statistically converged results for Reynolds stresses and the turbulent kinetic energy (TKE) budget. An extensive mesh refinement study using from 8 million to about 4 billions cells has been carried out. The turbulent dissipation is shown to be highly demanding on mesh resolution compared to other terms in TKE budget. The results obtained with the finest mesh are shown to be not far from converged results of turbulent dissipation which allow us to obtain estimations of the Kolmogorov and Hinze scales. The computed Hinze scale is significantly larger than the size of droplets observed and does not seem to be a relevant length scale to describe the smallest size of droplets formed in atomization.
References in corpus (6)
- Spray formation: a numerical closeup
- Understanding liquid-jet atomization cascades via vortex dynamics
- A numerical study of a variable-density low-speed turbulent mixing layer
- Vortices catapult droplets in atomization
- Primary Atomization of a Liquid Jet in Crossflow
- Improvements, testing and development of the ADM-τ sub-grid surface tension model for two-phase LES
Cited by in corpus (10)
- A volume-of-fluid method for interface-resolved simulations of phase-changing two-fluid flows
- Influence of the ambient pressure on the liquid accumulation and on the primary spray in prefilming airblast atomization
- Direct numerical simulations of transient turbulent jets: vortex-interface interactions
- Solving the Discretised Multiphase Flow Equations with Interface Capturing on Structured Grids Using Machine Learning Libraries
- Forecasting through deep learning and modal decomposition in two-phase concentric jets
- Aerodynamically-driven rupture of a liquid film by turbulent shear flow
- Modeling and Detailed Numerical Simulation of the Primary Breakup of a Gasoline Surrogate Jet under Non-Evaporative Operating Conditions
- Scale-by-scale kinetic energy budgets in multiphase turbulence
- A phase inversion benchmark for multiscale multiphase flows
- Statistics of drops generated from ensembles of randomly corrugated ligaments