Sub-Nyquist Radar Systems: Temporal, Spectral and Spatial Compression
arXiv:1807.11542 · doi:10.1109/MSP.2018.2868137
Abstract
Conventional radar transmits electromagnetic waves towards the targets of interest. In between the outgoing pulses, the radar measures the signal reflected from the targets to determine their presence, range, velocity and other characteristics. Radar systems face multiple challenges, generating many trade-offs such as bandwidth versus range resolution and dwell time versus Doppler resolution. In MIMO radar, high resolution requires a large aperture and high number of antennas, increasing hardware and processing requirements. Recently, novel approaches in sampling theory and radar signal processing have been proposed to allow target detection and parameter recovery from samples obtained below the Nyquist rate. These techniques exploit the sparsity of the target scene in order to reduce the required number of samples, pulses and antennas, breaking the link between bandwidth, dwell time and number of antennas on the one hand and range, Doppler and azimuth resolution, respectively, on the other. This review introduces this so-called sub-Nyquist radar paradigm and describes the corresponding sampling and recovery algorithms, that leverage compressed sensing techniques to perform time and spatial compression. We focus on non radar imaging applications and survey many recent compressed radar systems. Our goal is to review the main impacts of compressed radar on parameter resolution as well as digital and analog complexity. The survey includes fast and slow time compression schemes as well as spatial compression approaches. We show that beyond substantial rate reduction, compression may also enable communication and radar spectrum sharing. Throughout the paper, we consider both theoretical and practical aspects of compressed radar, and present hardware prototype implementations, demonstrating real-time target parameter recovery from low rate samples in pulse-Doppler and MIMO radars.
References in corpus (16)
- From Theory to Practice: Sub-Nyquist Sampling of Sparse Wideband Analog Signals
- Beyond Nyquist: Efficient Sampling of Sparse Bandlimited Signals
- High-Resolution Radar via Compressed Sensing
- Modified-CS: Modifying Compressive Sensing for Problems with Partially Known Support
- Xampling: Signal Acquisition and Processing in Union of Subspaces
- MIMO Radar Using Compressive Sampling
- Innovation Rate Sampling of Pulse Streams with Application to Ultrasound Imaging
- Learning with Structured Sparsity
- Spatial Compressive Sensing for MIMO Radar
- Robustly Stable Signal Recovery in Compressed Sensing with Structured Matrix Perturbation
- Multichannel Sampling of Pulse Streams at the Rate of Innovation
- Identification of Parametric Underspread Linear Systems and Super-Resolution Radar
- Analog to Digital Cognitive Radio: Sampling, Detection and Hardware
- MIMO-MC Radar: A MIMO Radar Approach Based on Matrix Completion
- Matrix Completion in Colocated MIMO Radar: Recoverability, Bounds & Theoretical Guarantees
- Recovery of Sparse Matrices via Matrix Sketching
Cited by in corpus (16)
- Spatial Modulation for Joint Radar-Communications Systems: Design, Analysis, and Hardware Prototype
- Gridless Parameter Estimation for One-Bit MIMO Radar with Time-Varying Thresholds
- Multi-Carrier Agile Phased Array Radar
- Task-Based Analog-to-Digital Converters
- TenDSuR: Tensor-Based 4D Sub-Nyquist Radar
- Radar and Communication Co-existence: an Overview
- BiLiMO: Bit-Limited MIMO Radar via Task-Based Quantization
- Structured LISTA for Multidimensional Harmonic Retrieval
- Unambiguous Delay-Doppler Recovery from Random Phase Coded Pulses
- High Resolution Radar Sensing with Compressive Illumination
- Sub-Nyquist Sampling OFDM Radar
- Compressed sensing radar detectors under the row-orthogonal design model: a statistical mechanics perspective
- RaSSteR: Random Sparse Step-Frequency Radar
- Height estimation for automotive MIMO radar with group-sparse reconstruction
- eSampling: Energy Harvesting ADCs
- Convex Reconstruction of Structured Matrix Signals from Linear Measurements (I): Theoretical Results