Analysis of Alfven Eigenmode destabilization in DIII-D high poloidal discharges using a Landau closure model
arXiv:1807.04380 · doi:10.1088/1741-4326/aac33f
Abstract
Alfven Eigenmodes are destabilized at the DIII-D pedestal during transient beta drops in high poloidal beta discharges with internal transport barriers (ITBs), driven by n=1 external kink modes, leading to energetic particle losses. There are two different scenarios in the thermal beta recovery phase: with bifurcation (two instability branches with different frequencies) or without bifurcation (single instability branch). We use the reduced MHD equations in a full 3D system, coupled with equations of density and parallel velocity moments for the energetic particles as well as the geodesic acoustic wave dynamics, to study the properties of the instabilities observed in the DIII-D high poloidal beta discharges and identify the conditions to trigger the bifurcation. The simulations suggest that instabilities with lower frequency in the bifurcation case are ballooning modes driven at the plasma pedestal, while the instability branch with higher frequencies are low n (n<4) Toroidal Alfven Eigenmodes nearby the pedestal. The reverse shear region between the middle and plasma periphery in the non-bifurcated case avoids the excitation of ballooning modes at the pedestal, although Toroidal Alfven Eigenmodes and Reverse Shear Alfven Eigenmodes are unstable in the reverse shear region. The n=1 and n=2 Alfven Eigenmode activity can be suppressed or minimized if the neutral beam injector (NBI) intensity is lower than the experimental value (betaf < 0.03). In addition, if the beam energy or neutral beam injector voltage is lower than in the experiment (Vth,f / VA0 < 0.2), the resonance between beam and thermal plasma is weaker. The n=3,4,5 and 6 AE activity can't be fully suppressed, although the growth rate and frequency is smaller for an optimized neutral beam injector operation regime. In conclusion, AE activity in high poloidal beta discharges can be minimized for optimized NBI operation regimes.
Cited by in corpus (10)
- Analysis of the MHD stability and energetic particles effects on EIC events in LHD plasma using a Landau-closure model
- Theoretical analysis of energetic-ion-driven resistive interchange mode stabilization strategies using a Landau closure model
- Study of the Alfven Eigenmodes stability in CFQS plasma using a Landau closure model
- Subdominant modes and optimization trends of DIII-D reverse magnetic shear configurations
- Simulation of the TAEs saturation phase in Large Helical Device device: MHD burst
- Effect of the neutral beam injector operational regime on the Alfven eigenmode saturation phase in DIII-D plasma
- MHD stability of JT-60SA operation scenarios driven by passing energetic particles for a hot Maxwellian model
- Theoretical study of the Alfven Eigenmode stability in CFETR steady state discharges
- Low-frequency shear Alfvén waves at DIII-D: theoretical interpretation of experimental observations
- Analysis of the ECH effect on the EPM/AEs stability in Heliotron J plasma using a Landau closure model