Thermal noise limited higher-order mode locking of a reference cavity
arXiv:1801.05026 · doi:10.1364/OL.43.001690
Abstract
Higher-order mode locking has been proposed to reduce the thermal noise limit of reference cavities. By locking a laser to the HG02 mode of a 10-cm long all ULE cavity, and measure its performance with the three-cornered-hat method among three independently stabilized lasers, we demonstrate a thermal noise limited performance of a fractional frequency instability of 4.9E-16. The results match the theoretical models with higher-order optical modes. The achieved laser instability improves the all ULE short cavity results to a new low level.
arXiv comment12pages, 4figures
References in corpus (14)
- Frequency Comparison of Two High-Accuracy Al+ Optical Clocks
- A sub-40 mHz linewidth laser based on a silicon single-crystal optical cavity
- Internal thermal noise in the LIGO test masses : a direct approach
- Compact, thermal-noise-limited optical cavity for diode laser stabilization at 1 x 10-15
- Sub-Hz line width diode lasers by stabilization to vibrationally and thermally compensated ULE Fabry-Perot cavities
- 8E-17 fractional laser frequency instability with a long room-temperature cavity
- Ultrastable lasers based on vibration insensitive cavities
- An ultrastable silicon cavity in a continuously operating closed-cycle cryostat at 4 K
- Higher-order Laguerre-Gauss mode generation and interferometry for gravitational wave detectors
- Ultra-stable laser with average fractional frequency drift rate below
- A compact, thermal noise limited reference cavity for ultra-low noise microwave generation
- Phase noise characterization of sub-hertz linewidth lasers via digital cross correlation
- Simple vibration insensitive cavity for laser stabilization at the 10^{-16} level
- A vibration-insensitive optical cavity and absolute determination of its ultrahigh stability
Cited by in corpus (8)
- Generation of very high-order high purity Gaussian modes via spatial light modulation
- A large scale passive laser gyroscope for Earth rotation sensing
- Suppression of residual amplitude modulation effect in the Pound-Drever-Hall locking
- An ultra-stable cryogenic sapphire cavity laser with an instability of based on a low vibration level cryostat
- A hybrid silicon-sapphire cryogenic Fabry-Perot cavity using hydroxide catalysis bonding
- 3 m3 m heterolithic passive resonant gyroscope with cavity length stabilization
- Ultraviolet laser spectroscopy of aluminum atoms in hollow-cathode lamp
- Mirror Coating Thermal Noise Mitigation Using Multi-Spatial Mode Cavity Readout