Fundamental residual amplitude modulation in electro-optic modulators

Abstract

The residual amplitude modulation ($\mathrm{RAM}$) is the undesired, non-zero amplitude modulation that usually occurs when a phase modulation based on the electro-optic effect is imprinted on a laser beam. In this work, we show that electro-optic modulators (EOMs) that are used to generate the sidebands on the laser beam also generate a $\mathrm{RAM}$ in the optical setup. This result contradicts standard textbooks, which assume the amplitude remains unchanged in the process and should be considered as a fundamental $\mathrm{RAM}$ ($\mathrm{RA}{\mathrm{M}}_{\mathrm{F}}$) for these devices. We present a classical model for the propagation of an infrared laser with frequency ${\omega }_0$ in a wedge-shaped crystal and an EOM with an RF modulating signal of frequency $\Omega$. Since $\Omega \ll {\omega }_0$, we solve Maxwell's equations in a time-varying media via a WKB approximation and we write the electromagnetic fields in terms of quasi-plane waves. From the emerging fields of the setup, we compute the associated $\mathrm{RA}{\mathrm{M}}_{\mathrm{F}}$ and show that it depends on the phase-modulation depth $m$ and the quotient $\left(\frac{\Omega }{{\omega }_0}\right)$. The $\mathrm{RA}{\mathrm{M}}_{\mathrm{F}}$ values obtained for the EOMs used in gravitational wave detectors are presented. Finally, the cancellation of $\mathrm{RA}{\mathrm{M}}_{\mathrm{F}}$ is analyzed.

10 pages, 3 figures