Chaotic behavior in Casimir oscillators: A case study for phase change materials
arXiv:1710.01538 · doi:10.1103/PhysRevE.96.042215
Abstract
Casimir forces between material surfaces at close proximity of less than 200 nm can lead to increased chaotic behavior of actuating devices depending on the strength of the Casimir interaction. We investigate these phenomena for phase change materials in torsional oscillators, where the amorphous to crystalline phase transitions lead to transitions between high and low Casimir force and torque states respectively, without material compositions. For a conservative system bifurcation curve and Poincare maps analysis show the absence of chaotic behavior but with the crystalline phase (high force/torque state) favoring more unstable behavior and stiction. However, for a non-conservative system chaotic behavior can occur introducing significant risk for stiction, which is again more pronounced for the crystalline phase. The latter illustrates the more general scenario that stronger Casimir forces and torques increase the possibility for chaotic behavior. The latter is making impossible to predict whether stiction or stable actuation will occur on a long term basis, and it is setting limitations in the design of micro/nano devices operating at short range nanoscale separations.
30 pages, 13 figures
References in corpus (15)
- Tests of new physics from precise measurements of the Casimir pressure between two gold-coated plates
- Precise comparison of theory and new experiment for the Casimir force leads to stronger constraints on thermal quantum effects and long-range interactions
- Tunable Casimir repulsion with three dimensional topological insulators
- Effect of hydrogen-switchable mirrors on the Casimir force
- On the torque on birefringent plates induced by quantum fluctuations
- Demonstration of optically modulated dispersion forces
- Non-contact rack and pinion powered by the lateral Casimir force
- Reduction of the Casimir force from indium tin oxide film by UV treatment
- Vacuum induced torque between corrugated metallic plates
- Rectification of the lateral Casimir force in a vibrating non-contact rack and pinion
- Nonlinear actuation dynamics of driven Casimir oscillators with rough surfaces
- A frustrated nanomechanical device powered by the lateral Casimir force
- Casimir torque between nanostructured plates
- An alternative calculation of the Casimir forces between birefringent plates
- Casimir torque between corrugated metallic plates