Design and Simulation of the IsoDAR RFQ Direct Injection System and Spiral Inflector
arXiv:1710.00441
Abstract
In this paper we present the development of a simulation code capable of optimizing the geometry of a spiral inflector designed for axial injection into a cyclotron. To do this, an electric field map of the device is generated by utilizing a boundary elements method and then used to track one or more particles. The information from the trajectories is then used to shorten the electrodes of the spiral inflector to adjust for fringing electric fields such that the particles end up on the mid-plane of the cyclotron. This method was also used to analyze the effects of a modified electrode geometry that can focus the beam as it travels through the device. Compared against commercial multiphysics software, the developed code produced similar results within a negligible margin of error attributed to differences in meshing and particle tracking algorithms.
Poster presented at the APS Division of Particles and Fields Meeting (DPF 2017), July 31-August 4, 2017, Fermilab. C170731