Overdense microwave plasma heating in the CNT stellarator
arXiv:1708.02684 · doi:10.1088/1361-6587/aa9a7c
Abstract
Overdense plasmas have been attained with 2.45 GHz microwave heating in the low-field, low-aspect-ratio CNT stellarator. Densities higher than four times the ordinary (O) mode cutoff density were measured with 8 kW of power injected in the O-mode and, alternatively, with 6.5 kW in the extraordinary (X) mode. The temperature profiles peak at the plasma edge. This was ascribed to collisional damping of the X-mode at the upper hybrid resonant layer. The X-mode reaches that location by tunneling, mode-conversions or after polarization-scrambling reflections off the wall and in-vessel coils, regardless of the initial launch being in O- or X-mode. This interpretation was confirmed by full-wave numerical simulations. Also, as the CNT plasma is not completely ionized at these low microwave power levels, electron density was shown to increase with power. A dependence on magnetic field strength was also observed (for O-mode launch) and discussed.
arXiv comment24 pages, 12 figures
References in corpus (6)
- Influence of plasma turbulence on microwave propagation
- Experimental and numerical study of error fields in the CNT stellarator
- Full-wave modeling of the O-X mode conversion in the Pegasus Toroidal Experiment
- Onion-peeling inversion of stellarator images
- High- equilibrium and ballooning stability of the low aspect ratio CNT stellarator
- Full-Wave Feasibility Study of Anti-Radar Diagnostic of Magnetic Field Based on O-X Mode Conversion and Oblique Reflectometry Imaging