Predictive modeling of solidification during laser additive manufacturing of nickel superalloys: Recent developments, future directions

Abstract

Additive manufacturing (AM) processes produce parts with improved physical, chemical, and mechanical properties compared to conventional manufacturing processes. In AM processes, intricate part geometries are produced from multicomponent alloy powder, in a layer-by-layer fashion with multipass laser melting, solidification, and solid-state phase transformations, in a shorter manufacturing time, with minimal surface finishing, and at a reasonable cost. However, there is an increasing need for post-processing of the manufactured parts via, for example, stress relieving heat treatment and hot isostatic pressing to achieve homogeneous microstructure and properties at all times. Solidification in an AM process controls the size, shape, and distribution of the grains, the growth morphology, the elemental segregation and precipitation, the subsequent solid-state phase changes, and ultimately the material properties. The critical issues in this process are linked with multiphysics (such as fluid flow and diffusion of heat and mass) and multiscale (lengths, times and temperature ranges) challenges that arise due to localized rapid heating and cooling during AM processing. The alloy chemistry-process-microstructure-property-performance correlation in this process will be increasingly better understood through multiscale modeling and simulation.

Accepted for Publication in Materials Research Express on December 8, 2017

References in corpus (4)

• On the primary spacing and microsegregation of cellular dendrites in laser deposited Ni-Nb alloys
• Simulation and analysis of $\gamma$-Ni cellular growth during laser powder deposition of Ni-based superalloys
• Formation of Nb-rich droplets in laser deposited Ni-matrix microstructures
• Particles with selective wetting affect spinodal decomposition microstructures