AC noise reduction based on exchange coupled grains for heat-assisted-magnetic recording: The effect of an FeRh interlayer
arXiv:1706.02106 · doi:10.1103/PhysRevApplied.8.054021
Abstract
High storage density and high data rate are two of the most desired properties of modern hard disk drives. Heat-assisted magnetic recording (HAMR) is believed to achieve both. Recording media, consisting of exchange coupled grains with a high and a low part, were shown to have low DC noise, but increased AC noise, compared to hard magnetic single phase grains, like FePt [1]. In this work we extensively investigate the influence of an FeRh interlayer on the magnetic noise in exchange coupled grains. We find an optimal grain design that reduces the jitter in down-track direction by up to 30 % and in off-track direction by up to 50 %, depending on the head velocity, compared to the same structures without FeRh. Further, the mechanisms causing this jitter reduction are demonstrated. Additionally, we show that for ultrashort heat pulses and low write temperatures the switching time distribution of the analyzed grain structure is reduced by a factor of four, compared to the same structure without FeRh layer. This feature could be interesting for HAMR with a pulsed laser spot and could resume the discussion about this HAMR technique.
References in corpus (10)
- Dynamic approach for micromagnetics close to the Curie temperature
- Speed limit of FePt spin dynamics on femtosecond timescales
- Thermal fluctuations and longitudinal relaxation of single-domain magnetic particles at elevated temperatures
- magnum.fe: A micromagnetic finite-element simulation code based on FEniCS
- Heat assisted magnetic recording of bit patterned media beyond 10 Tb/in
- Higher order exchange interactions leading to metamagnetism in FeRh
- Landau-Lifshitz-Bloch equation for exchange coupled grains
- Laser induced magnetization switching in films with perpendicular anisotropy: a comparison between measurements and a multi-macrospin model
- Areal density optimizations for heat-assisted-magnetic recording of high density bit-patterned media
- Basic noise mechanisms of heat-assisted-magnetic recording