All-Optical Detection of Acoustic Pressure Waves with applications in Photo-Acoustic Spectroscopy

Abstract

An all-optical detection method for the detection of acoustic pressure waves is demonstrated. The detection system is based on a stripped (bare) single-mode fiber. The fiber vibrates as a standard cantilever and the optical output from the fiber is imaged to a displacement-sensitive optical detector. The absence of a conventional microphone makes the demonstrated system less susceptible to the effects that a hazardous environment might have on the sensor. The sensor is also useful for measurements in high temperature (above $200^{\circ }$C) environments where conventional microphones will not operate. The proof-of-concept of the all-optical detection method is demonstrated by detecting sound waves generated by the photo-acoustic effect of NO${}_2$ excited by a 455 nm LED, where a detection sensitivity of approximately 50 ppm was achieved.

5 pages, 5 figures

References in corpus (3)

• TEM10 homodyne detection as an optimal small displacement and tilt measurements scheme
• A versatile integrating sphere based photoacoustic sensor for trace gas monitoring
• Phase-Sensitive Noise Suppression in a Photoacoustic Sensor based on Acoustic Circular Membrane Modes