On-sky single-mode fiber coupling measurements at the Large Binocular Telescope

Abstract

The demonstration of efficient single-mode fiber (SMF) coupling is a key requirement for the development of a compact, ultra-precise radial velocity (RV) spectrograph. iLocater is a next generation instrument for the Large Binocular Telescope (LBT) that uses adaptive optics (AO) to inject starlight into a SMF. In preparation for commissioning iLocater, a prototype SMF injection system was installed and tested at the LBT in the Y-band (0.970-1.065 $\mu$m). This system was designed to verify the capability of the LBT AO system as well as characterize on-sky SMF coupling efficiencies. SMF coupling was measured on stars with variable airmasses, apparent magnitudes, and seeing conditions for six half-nights using the Large Binocular Telescope Interferometer. We present the overall optical and mechanical performance of the SMF injection system, including details of the installation and alignment procedure. A particular emphasis is placed on analyzing the instrument's performance as a function of telescope elevation to inform the final design of the fiber injection system for iLocater.

11 pages, 7 figures

Cited by in corpus (10)

• Efficient injection from large telescopes into single-mode fibres: Enabling the era of ultra-precision astronomy
• Astrophotonic Spectrographs
• Enhancing stellar spectroscopy with extreme adaptive optics and photonics
• Demonstration of an efficient, photonic-based astronomical spectrograph on an 8-m telescope
• Characterization of Single-Mode Fiber Coupling at the Large Binocular Telescope
• 3D-M3: High-spatial resolution spectroscopy with extreme AO and 3D printed micro-lenslets
• Fibre Fabry-Pérot Astrophotonic Correlation Spectroscopy for Remote Gas Identification and Radial Velocity Measurements
• Focal Plane Tip-Tilt Sensing for Improved Single-Mode Fiber Coupling using a 3D-printed Microlens-Ring
• On-sky results for the novel integrated micro-lens ring tip-tilt sensor
• The iLocater cryostat: design and thermal control strategy for precision radial velocity measurements