Ultralow-density double-layer silica aerogel fabrication for the intact capture of cosmic dust in low-Earth orbits
arXiv:1512.03991 · doi:10.1007/s10971-015-3857-3
Abstract
The fabrication of an ultralow-density hydrophobic silica aerogel for the intact capture cosmic dust during the Tanpopo mission is described. The Tanpopo experiment performed on the International Space Station orbiting the Earth includes the collection of terrestrial and interplanetary dust samples on a silica aerogel capture medium exposed to space for later ground-based biological and chemical analyses. The key to the mission's success is the development of high-performance capture media, and the major challenge is to satisfy the mechanical requirements as a spacecraft payload while maximizing the performance for intact capture. To this end, an ultralow-density (0.01 g cm) soft aerogel was employed in combination with a relatively robust 0.03 g cm aerogel. A procedure was also established for the mass production of double-layer aerogel tiles formed with a 0.01 g cm surface layer and a 0.03 g cm open-topped, box-shaped base layer, and 60 aerogel tiles were manufactured. The fabricated aerogel tiles have been demonstrated to be suitable as flight hardware with respect to both scientific and safety requirements.
arXiv commentTo be published in J. Sol-Gel Sci. Technol., 10 pages, 5 figures, 1 table
References in corpus (7)
- Study of a Threshold Cherenkov Counter Based on Silica Aerogels with Low Refractive Indices
- Development of transparent silica aerogel over a wide range of densities
- Hydrophobic silica aerogel production at KEK
- Recent progress in silica aerogel Cherenkov radiator
- Tanpopo cosmic dust collector: Silica aerogel production and bacterial DNA contamination analysis
- Design of a silica-aerogel-based cosmic dust collector for the Tanpopo mission aboard the International Space Station
- Silica aerogel for capturing intact interplanetary dust particles for the Tanpopo experiment