The performance of a combined solar photovoltaic (PV) and thermoelectric generator (TEG) system

Abstract

The performance of a combined solar photovoltaic (PV) and thermoelectric generator (TEG) system is examined using an analytical model for four different types of commercial PVs and a commercial bismuth telluride TEG. The TEG is applied directly on the back of the PV, so that the two devices have the same temperature. The PVs considered are crystalline Si (c-Si), amorphous Si (a-Si), copper indium gallium (di)selenide (CIGS) and cadmium telluride (CdTe) cells. The degradation of PV performance with temperature is shown to dominate the increase in power produced by the TEG, due to the low efficiency of the TEG. For c-Si, CIGS and CdTe PV cells the combined system produces a lower power and has a lower efficiency than the PV alone, whereas for an a-Si cell the total system performance may be slightly increased by the TEG.

10 pages, 6 figures

Cited by in corpus (6)

• The maximum theoretical performance of unconcentrated solar photovoltaic and thermoelectric generator systems
• Reduction of a nonlinear system and its numerical solution using a fractional iterative method
• Acceleration of the order of convergence of a family of fractional fixed point methods and its implementation in the solution of a nonlinear algebraic system related to hybrid solar receivers
• Entropy production in photovoltaic-thermoelectric nanodevices from the non-equilibrium Green's function formalism
• Practical development of efficient thermoelectric-photovoltaic hybrid systems based on wide-gap solar cells
• Fractional pseudo-Newton method and its use in the solution of a nonlinear system that allows the construction of a hybrid solar receiver