Effect of randomly occurring Stone-Wales defects on mechanical properties of carbon nanotubes using atomistic simulation

Abstract

While CNTs are found to have ultra high stiffness and strength, an enormous scatter is also observed in available laboratory results. This paper studies the effects of randomly distributed Stone Wales (SW or 5 7 7 5) defects on the mechanical properties of single walled nanotubes (SWNTs) using the technique of atomistic simulation (AS). A Matern hard core random field applied on a finite cylindrical surface is used to describe the spatial distribution of the Stone Wales defects. We simulate a set of displacement controlled tensile loading up to fracture of SWNTs with (6,6) armchair and (10, 0) zigzag configurations and aspect ratio around 6. A modified Morse potential is adopted to model the interatomic forces. We found that fracture invariably initiates from a defect if one is present; for a defect-free tube the crack initiates at quite random locations. The force-displacement curve typically behaves almost linearly up to about half way, although there is no obvious yield point. Three mechanical properties - stiffness, ultimate strength and ultimate strain - are calculated from the simulated force and displacement time histories. The randomness in mechanical behavior resulting only from initial velocity distribution was found to be insignificant at room temperature. The mean values of stiffness, ultimate strength and ultimate strain of the tube decrease as the average number of defects increases although the coefficients of variation do not show such monotonic trend. The introduction of an additional defect has the most pronounced effect on the randomness in mechanical properties when the tube is originally defect free. We also found that, for a given mean number of defects in the tube, the zigzag configuration has less strength and less ultimate strain on the average, but more uncertainty in its stiffness and ultimate strain, compared with the armchair tube.

References in corpus (7)

• Elastic Properties of C and BxCyNz Composite Nanotubes
• Atomistic Simulations of Nanotube Fracture
• Ab-initio structural, elastic, and vibrational properties of carbon nanotubes
• Single- and multi-walled carbon nanotubes viewed as elastic tubes with Young's moduli dependent on layer number
• The strain energy and Young's Moduli of single-wall Carbon nanotubules calculated from the electronic energy-band theory
• Tensile Strength of Carbon Nanotubes under Realistic Temperature and Strain Rate
• Structural stability and energetics of single-walled carbon nanotubes under uniaxial strain

Cited by in corpus (8)

• Anomalous Strength Characteristics of Tilt Grain Boundaries in Graphene
• A Perspective on High-performance CNT fibres for Structural Composites
• Size effects in micro and nanoscale materials fracture
• Fracture resistance of zigzag single walled carbon nanotubes
• Stone-Wales defects can cause a metal-semiconductor transition in carbon nanotubes depending on their orientation
• Effect of Randomly Distributed Asymmetric Stone-Wales Defect on Electronic and Transport Properties of Armchair Graphene Nanoribbon
• Structural characterization of carbon nanotubes via the vibrational density of states
• Strain and screening: Optical properties of a small-diameter carbon nanotube from first principles