Strong, Tough and Stiff Bioinspired Ceramics from Brittle Constituents

Abstract

High strength and high toughness are usually mutually exclusive in engineering materials. Improving the toughness of strong but brittle materials like ceramics thus relies on the introduction of a metallic or polymeric ductile phase to dissipate energy, which conversely decreases the strength, stiffness, and the ability to operate at high temperature. In many natural materials, toughness is achieved through a combination of multiple mechanisms operating at different length scales but such structures have been extremely difficult to replicate. Building upon such biological structures, we demonstrate a simple approach that yields bulk ceramics characterized by a unique combination of high strength (470 MPa), high toughness (22 MPa.m1/2), and high stiffness (290 GPa) without the assistance of a ductile phase. Because only mineral constituents were used, this material retains its mechanical properties at high temperature (600°C). The bioinspired, material-independent design presented here is a specific but relevant example of a strong, tough, and stiff material, in great need for structural, transportations, and energy-related applications.

27 pages, 4 figures, supplementary data, 47 references

References in corpus (2)

• Architectural control of freeze-cast ceramics through additives and templating
• In Situ X-Ray Radiography and Tomography Observations of the Solidification of Alumina Particles Suspensions. Part I: Initial Instants

Cited by in corpus (13)

• Enhanced pyroelectric and piezoelectric properties of PZT with aligned porosity for energy harvesting applications
• Magnetic slip casting: a review of current achievements and issues
• Templated Grain Growth in Macroporous Materials
• Ultrafast high-temperature sintering of dense and textured alumina
• Extracting Geometry and Topology of Orange Pericarps for the Design of Bioinspired Energy Absorbing Materials
• A materials perspective on the design of damage-resilient artificial bones and bone implants through additive/advanced manufacturing
• The Mesoscale Crystallinity of Nacreous Pearls
• Hybrid gold single crystals incorporating amino acids
• Modeling the effect of microstructure on elastic wave propagation in platelet-reinforced composites and ceramics
• Assessment of nacre-like ceramics in replacement to Ni superalloys in aircraft's engines
• Toughening in a nacre-like soft-hard layered structure due to weak nonlinearity in the soft layer
• Predicting the Porosity Formed in Freeze Casting by Artificial Neural Network
• Reply to the correspondence: "On the fracture toughness of bioinspired ceramic materials"