Preventing and Reversing Vacuum-Induced Optical Losses in High-Finesse Tantalum (V) Oxide Mirror Coatings
arXiv:1505.03381 · doi:10.1364/OE.23.018014
Abstract
We study the vacuum-induced degradation of high-finesse optical cavities with mirror coatings composed of SiO-TaO dielectric stacks, and present methods to protect these coatings and to recover their initial quality factor. For separate coatings with reflectivities centered at 370 nm and 422 nm, a vacuum-induced continuous increase in optical loss occurs if the surface-layer coating is made of TaO, while it does not occur if it is made of SiO. The incurred optical loss can be reversed by filling the vacuum chamber with oxygen at atmospheric pressure, and the recovery rate can be strongly accelerated by continuous laser illumination at 422 nm. Both the degradation and the recovery processes depend strongly on temperature. We find that a 1 nm-thick layer of SiO passivating the TaO surface layer is sufficient to reduce the degradation rate by more than a factor of 10, strongly supporting surface oxygen depletion as the primary degradation mechanism.
14 pages, 7 figures
References in corpus (1)
Cited by in corpus (11)
- Strong Purcell effect on a neutral atom trapped in an open fiber cavity
- Cavity-induced back-action in Purcell-enhanced photoemission of a single ion in an ultraviolet fiber-cavity
- Stable High Power deep-UV Enhancement Cavity in Ultra High Vacuum with Fluoride Coatings
- Cavity enhanced DUV laser for two-photon cooling of atomic hydrogen
- Microelectromechanical-System-Based Design of a High-Finesse Fiber Cavity Integrated with an Ion Trap
- Locking Multi-laser Frequencies to a Precision Wavelength Meter: Application to Cold Atoms
- Pulsed CW laser for long-term spectroscopic measurements at high power in deep-UV
- Ultraviolet Fabry-Perot cavity with stable finesse under ultrahigh vacuum conditions
- Trapping Yb Atoms into a One-Dimensional Optical Lattice with a Small Waist
- Overlapping two standing-waves in a microcavity for a multi-atom photon interface
- Low Duty Cycle Pulsed UV Technique for Spectroscopy of Aluminum Monochloride