Cancellation of lateral displacement noise of 3-port gratings for coupling light to cavities
arXiv:1503.01381 · doi:10.1364/OL.40.002053
Abstract
Reflection gratings enable light coupling to optical cavities without transmission through substrates. Gratings that have three ports and are mounted in second-order Littrow configuration even allow the coupling to high-finesse cavities using low diffraction efficiencies. In contrast to conventional transmissive cavity couplers, however, the phase of the diffracted light depends on the lateral position of the grating, which introduces an additional noise coupling. Here we experimentally demonstrate that this kind of noise cancels out once both diffracted output ports of the grating are combined. We achieve the same signal-to-shot-noise ratio as for a conventional coupler. From this perspective, 3-port grating couplers in second-order Littrow configuration remain a valuable approach to reducing optical absorption of cavity coupler substrates in future gravitational wave detectors.
References in corpus (8)
- Optical characterization of ultra-high diffraction efficiency gratings
- Low-loss grating for coupling to a high-finesse cavity
- Input-output relations for a 3-port grating coupled Fabry-Perot cavity
- Phase and alignment noise in grating interferometers
- All-reflective coupling of two optical cavities with 3-port diffraction gratings
- Demonstration of 3-port grating phase relations
- Michelson interferometer with diffractively-coupled arm resonators in second-order Littrow configuration
- Diffractively coupled Fabry-Perot resonator with power-recycling