Universal mechanism for air entrainment during liquid impact
arXiv:1502.02869 · doi:10.1017/jfm.2015.757
Abstract
When a mm-sized liquid drop approaches a deep liquid pool, both the interface of the drop and the pool deform before the drop touches the pool. The build up of air pressure prior to coalescence is responsible for this deformation. Due to this deformation, air can be entrained at the bottom of the drop during the impact. We quantify the amount of entrained air numerically, using the Boundary Integral Method (BIM) for potential flow for the drop and the pool, coupled to viscous lubrication theory for the air film that has to be squeezed out during impact. We compare our results to various experimental data and find excellent agreement for the amount of air that is entrapped during impact onto a pool. Next, the impact of a rigid sphere onto a pool is numerically investigated and the air that is entrapped in this case also matches with available experimental data. In both cases of drop and sphere impact onto a pool the numerical air bubble volume V_b is found to be in agreement with the theoretical scaling V_b/V_{drop/sphere} ~ St^{-4/3}, where St is the Stokes number. This is the same scaling that has been found for drop impact onto a solid surface in previous research. This implies a universal mechanism for air entrainment for these different impact scenarios, which has been suggested in recent experimental work, but is now further elucidated with numerical results.
References in corpus (6)
- Maximal air bubble entrainment at liquid drop impact
- Direct measurements of air layer profiles under impacting droplets using high-speed color interferometry
- Von Kármán Vortex Street within an Impacting Drop
- Oscillating and star-shaped drops levitated by an airflow
- A robust and non-singular formulation of the boundary integral method for the potential problem
- Initial surface deformations during impact on a liquid pool
Cited by in corpus (15)
- Comparison between the diffuse interface and volume of fluid methods for simulating two-phase flows
- Deformation and relaxation of viscous thin films under bouncing drops
- Air-cushioning effect and Kelvin-Helmholtz instability before the slamming of a disk on water
- Capillary-scale solid rebounds: experiments, modelling and simulations
- The asymmetric coalescence of two droplets with different surface tensions is caused by capillary waves
- Triple condensate halo from water droplets impacting on cold surfaces
- Droplet impact on immiscible liquid pool: Multi-scale dynamics of entrapped air cushion at short timescales
- Droplet settling on solids coated with a soft layer
- High Fidelity Simulations of Micro-Bubble Shedding from Retracting Thin Gas Films in the Context of Liquid-Liquid Impact
- Birth of a bubble: Drop impact onto a thin liquid film for an immiscible three-fluid system
- Impact of a rigid sphere onto an elastic membrane
- Air Entrainment and Surface Fluctuations in a Turbulent Ship Hull Boundary Layer
- Dynamic pressure enhancement upon disk impact on a boiling liquid
- Effect of velocity, fluid properties and drop shape on coalescence and neck oscillation
- Non-wetting drop dynamics