Silicon Sensors for Trackers at High-Luminosity Environment
arXiv:1411.7133 · doi:10.1016/j.nima.2015.03.031
Abstract
The planned upgrade of the LHC accelerator at CERN, namely the high luminosity (HL) phase of the LHC (HL-LHC foreseen for 2023), will result in a more intense radiation environment than the present tracking system was designed for. The required upgrade of the all-silicon central trackers at the ALICE, ATLAS, CMS and LHCb experiments will include higher granularity and radiation hard sensors. The radiation hardness of the new sensors must be roughly an order of magnitude higher than the one of LHC detectors. To address this, a massive R&D program is underway within the CERN RD50 collaboration "Development of Radiation Hard Semiconductor Devices for Very High Luminosity Colliders" to develop silicon sensors with sufficient radiation tolerance. Research topics include the improvement of the intrinsic radiation tolerance of the sensor material and novel detector designs with benefits like reduced trapping probability (thinned and 3D sensors), maximized sensitive area (active edge sensors) and enhanced charge carrier generation (sensors with intrinsic gain). A review of the recent results from both measurements and TCAD simulations of several detector technologies and silicon materials at radiation levels expected for HL-LHC will be presented.
arXiv comment7 pages, 9 figures, 10th International Conference on Radiation Effects on Semiconductor Materials, Detectors and Devices (RESMDD14), 8-10 October, Firenze, Italy
References in corpus (6)
- Physics potential and experimental challenges of the LHC luminosity upgrade
- Prototype ATLAS IBL Modules using the FE-I4A Front-End Readout Chip
- Radiation Induced Point and Cluster-Related Defects with Strong Impact to Damage Properties of Silicon Detectors
- Properties of a radiation-induced charge multiplication region in epitaxial silicon diodes
- Development of active edge pixel sensors and four-side buttable modules using vertical integration technologies
- A Method to Simulate the Observed Surface Properties of Proton Irradiated Silicon Strip Sensors