Controlled reattachment in separated flows: a variational approach to recirculation length reduction

Abstract

A variational technique is used to derive analytical expressions for the sensitivity of recirculation length to steady forcing in separated flows. Linear sensitivity analysis is applied to the two-dimensional steady flow past a circular cylinder for Reynolds numbers $40\le Re\le 120$, both in the subcritical and supercritical regimes. Regions which are the most sensitive to volume forcing and wall blowing/suction are identified. Control configurations which reduce the recirculation length are designed based on the sensitivity information, in particular small cylinders used as control devices in the wake of the main cylinder, and fluid suction at the cylinder wall. Validation against full non-linear Navier-Stokes calculations shows excellent agreement for small-amplitude control. The linear stability properties of the controlled flow are systematically investigated. At moderate Reynolds numbers, we observe that regions where control reduces the recirculation length correspond to regions where it has a stabilising effect on the most unstable global mode associated to vortex shedding, while this property does not hold any more at larger Reynolds numbers.

arXiv comment17 pages, 11 figures

Cited by in corpus (6)

• Reinforcement-learning-based control of confined cylinder wakes with stability analyses
• Sensitivity and open-loop control of stochastic response in a noise amplifier flow: the backward-facing step
• Second-order sensitivity in the cylinder wake: optimal spanwise-periodic wall actuation and wall deformation
• Second-order adjoint-based sensitivity for hydrodynamic stability and control
• Manipulating flow separation: sensitivity of stagnation points, separatrix angles and recirculation area to steady actuation
• Optimal spanwise-periodic control for recirculation length in a backward-facing step flow