Mechanical Properties and Plasticity of a Model Glass Loaded Under Stress Control

Abstract

Much of the progress achieved in understanding plasticity and failure in amorphous solids had been achieved using experiments and simulations in which the materials were loaded using strain control. There is paucity of results under stress control. Here we present a new method that was carefully geared to allow loading under stress control either at $T=0$ or at any other temperature, using Monte-Carlo techniques. The method is applied to a model perfect crystalline solid, to a crystalline solid contaminated with topological defects, and to a generic glass. The highest yield stress belongs to the crystal, the lowest to the crystal with a few defects, with the glass in between. Although the glass is more disordered than the crystal with a few defects, it yields stress is much higher than that of the latter. We explain this fact by considering the actual microscopic interactions that are typical to glass forming materials, pointing out the reasons for the higher cohesive nature of the glass. The main conclusion of this paper is that the instabilities encountered in stress-control condition are the identical saddle-node bifurcation seen in strain-control. Accordingly one can use the latter condition to infer about the former. Finally we discuss temperature effects and comment on the time needed to see a stress controlled material failure.

References in corpus (9)

• Dynamics of Viscoplastic Deformation in Amorphous Solids
• Scaling behavior in the $\beta$-relaxation regime of a supercooled Lennard-Jones mixture
• Universal Breakdown of Elasticity at the Onset of Material Failure
• Statistical Physics of the Yielding Transition in Amorphous Solids
• Locality and Non-locality in Elasto-plastic Responses of Amorphous Solids
• Predicting plastic flow events in athermal shear-strained amorphous solids
• Direct Identification of the Glass Transition: Growing Length Scale and the Onset of Plasticity
• Geometrical families of mechanically stable granular packings
• Mechanical Properties of Glass Forming Systems

Cited by in corpus (5)

• Elasticity in Amorphous Solids: Nonlinear or Piece-Wise Linear?
• Particle rearrangement and softening contributions to the nonlinear mechanical response of glasses
• Breakdown of Nonlinear Elasticity in Stress-Controlled Thermal Amorphous Solids
• Consequences of Disorder on the Stability of Amorphous Solids
• Following the evolution of metastable glassy states under external perturbations: compression and shear-strain