A Trapped Field of 17.6 T in Melt-Processed, Bulk Gd-Ba-Cu-O Reinforced with Shrink-Fit Steel
arXiv:1406.0686 · doi:10.1088/0953-2048/27/8/082001
Abstract
The ability of large grain, REBaCuO [(RE)BCO; RE = rare earth] bulk superconductors to trap magnetic field is determined by their critical current. With high trapped fields, however, bulk samples are subject to a relatively large Lorentz force, and their performance is limited primarily by their tensile strength. Consequently, sample reinforcement is the key to performance improvement in these technologically important materials. In this work, we report a trapped field of 17.6 T, the largest reported to date, in a stack of two, silver-doped GdBCO superconducting bulk samples, each of diameter 25 mm, fabricated by top-seeded melt growth (TSMG) and reinforced with shrink-fit stainless steel. This sample preparation technique has the advantage of being relatively straightforward and inexpensive to implement and offers the prospect of easy access to portable, high magnetic fields without any requirement for a sustaining current source.
arXiv commentUpdated submission to reflect licence change to CC-BY. This is the "author accepted manuscript" and is identical in content to the published version
References in corpus (1)
Cited by in corpus (26)
- Recent advances in iron-based superconductors toward applications
- Permanent magnet with MgB2 bulk superconductor
- A trapped field of 17.7 T in a stack of high temperature superconducting tape
- Demonstration of an iron-pnictide bulk superconducting magnet capable of trapping over 1 T
- A portable magnetic field of > 3 T generated by the flux jump assisted, pulsed field magnetisation of bulk superconductors
- Grain boundary characteristics of Fe-based superconductors
- Simulation of Stacks of High Temperature Superconducting Coated Conductors Magnetized by Pulsed Field Magnetization Using Controlled Magnetic Density Distribution Coils
- Composite stacks for reliable > 17 T trapped fields in bulk superconductor magnets
- High-temperature superconductors of the family (RE)Ba2Cu3O7-delta and their application (Review Article)
- A new seeding technique for the reliable fabrication of large, SmBCO single grains containing silver using top seeded melt growth
- Simulation and experiments of Stacks of High Temperature Superconducting Coated Conductors Magnetized by Pulsed Field Magnetization with Multi-Pulse Technique
- Highly Porous Superconductors: Synthesis, Research, and Prospects
- Development of homogeneous and high-performance REBCO bulks with flexibility in shapes by the single-direction melt growth (SDMG) method
- Recent progress in high-temperature superconducting undulators
- Demagnetization of cubic Gd-Ba-Cu-O bulk superconductor by cross-fields: measurements and 3D modelling
- Fast and efficient critical state modelling of field-cooled bulk high-temperature superconductors using a backward computation method
- Cross-field demagnetization of stacks of tapes: 3D modelling and measurements
- 3D magnetization currents, magnetization loop, and saturation field in superconducting rectangular prisms
- Direct fabrication of high-quality ring-shaped REBa2Cu3Oy bulk magnets by the Single-Direction Melt Growth (SDMG) method
- Modeling cross-field demagnetization of superconducting stacks and bulks for up to 100 tapes and 2 million cycles
- Trapping a magnetic field of 14.8 T using stacked coated conductors of 12 mm width
- Simulation of High Temperature Superconducting Bulks Magnetized by Pulsed Field Magnetization with an Electromagnetic-Thermal Coupled Model
- Complete and Robust Magnetic Field Confinement by Superconductors in Fusion Magnets
- Measurement of critical current flow and connectivity in systems of joined square superconducting plates
- Long time behavior of nonlinear electromagnetic wave in vacuum beyond linear approximation
- Transformation of the trapped flux in a SC disc under electromagnetic exposure