paper

Precision control of thermal transport in cryogenic single-crystal silicon devices

arXiv:1403.1326 · doi:10.1063/1.4869737

Abstract

We report on the diffusive-ballistic thermal conductance of multi-moded single-crystal silicon beams measured below 1 K. It is shown that the phonon mean-free-path is a strong function of the surface roughness characteristics of the beams. This effect is enhanced in diffuse beams with lengths much larger than , even when the surface is fairly smooth, 5-10 nm rms, and the peak thermal wavelength is 0.6 m. Resonant phonon scattering has been observed in beams with a pitted surface morphology and characteristic pit depth of 30 nm. Hence, if the surface roughness is not adequately controlled, the thermal conductance can vary significantly for diffuse beams fabricated across a wafer. In contrast, when the beam length is of order , the conductance is dominated by ballistic transport and is effectively set by the beam area. We have demonstrated a uniformity of 8% in fractional deviation for ballistic beams, and this deviation is largely set by the thermal conductance of diffuse beams that support the micro-electro-mechanical device and electrical leads. In addition, we have found no evidence for excess specific heat in single-crystal silicon membranes. This allows for the precise control of the device heat capacity with normal metal films. We discuss the results in the context of the design and fabrication of large-format arrays of far-infrared and millimeter wavelength cryogenic detectors.

References in corpus (1)

Cited by in corpus (7)