Effects of Irradiation Temperature and Dose Rate on the Mechanical Properties of Self-Ion Implanted Fe and Fe-Cr Alloys
arXiv:1311.3786 · doi:10.1016/j.jnucmat.2013.03.052
Abstract
Pure Fe and model Fe-Cr alloys containing 5, 10 and 14%Cr were irradiated with Fe+ ions at a maximum energy of 2MeV to the same dose of 0.6dpa at temperatures of 300 C, 400 C and 500 C, and at dose rates corresponding to 6 x 10-4 dpa/s and 3 x 10-5 dpa/s. All materials exhibited an increase in hardness after irradiation at 300 C. After irradiation at 400 C, hardening was observed only in Fe-Cr alloys, and not in the pure Fe. After irradiation at 500 C, no hardening was observed in any of the materials tested. For irradiations at both 300 C and 400 C, greater hardening was found in the Fe-Cr alloys irradiated at the lower dose rate. Transmission electron microscopy and atom probe tomography of Fe 5%Cr identified larger dislocation loop densities and sizes in the alloy irradiated with the high dose rate and Cr precipitation in the alloy irradiated with the low dose rate.
arXiv comment42 pages, 6 figures
Cited by in corpus (12)
- Spatial ordering of nano-dislocation loops in ion-irradiated materials
- Elastic dipole tensors and relaxation volumes of point defects in concentrated random magnetic Fe-Cr alloys
- Nanoscale lattice strains in self-ion implanted tungsten
- The Dynamics of Magnetism in Fe-Cr Alloys with Cr Clustering
- Characterising Ion-Irradiated FeCr: Hardness, Thermal Diffusivity and Lattice Strain
- Non-contact, non-destructive mapping of thermal diffusivity and surface acoustic wave speed using transient grating spectroscopy
- Chromium-vacancy clusters in dilute bcc Fe-Cr alloys: an ab initio study
- Co-evolution of point defects and Cr-rich nano-phase in binary Fe-20 at.% Cr alloy: A comprehensive investigation using positron annihilation spectroscopy and atom probe tomography
- First principles model for voids decorated by transmutation solutes: Short-range order effects and application to neutron irradiated tungsten
- Deformation Behaviour of Ion-Irradiated FeCr: A Nanoindentation Study
- Effect of 0.25 and 2.0 MeV He-ion irradiation on short-range ordering in model (EFDA) Fe-Cr alloys
- Characterisation of Irradiation Damage in Fe3Cr and Fe5Cr: A Study on the Effects of Chromium Content and Temperature