Wetting Boundary Conditions in Phase-Field-Based Simulation of Binary Fluids: Some Comparative Studies and New Development
arXiv:1310.8412 · doi:10.1002/fld.3975
Abstract
We studied several wetting boundary conditions (WBCs) in the simulation of binary fluids based on phase-field theory. Five WBCs, three belonging to the surface energy (SE) formulation using the linear, cubic and sine functions (denoted as LinSE, CubSE and SinSE), the fourth using a geometric formulation (Geom), and the fifth using a characteristic interpolation (CI), were compared with each other through the study of several problems: (1) the static contact angle of a drop; (2) a Poiseuille flow-driven liquid column; (3) a wettability gradient (WG)-driven liquid column; (4) drop dewetting. It was found that while all WBCs can predict the static contact angle fairly accurately, they may affect the simulation outcomes of dynamic problems differently, depending on the driving mechanism. For the flow-driven problem, to use different WBCs had almost no effect on the flow characteristics over a large scale. But for other capillarity-driven problems, the WBC had some noticeable effects. For the WG-driven liquid column, Geom gave the most consistent prediction between the drop velocity and dynamic contact angles, and LinSE delivered the poorest prediction in this aspect. Except for Geom, the dynamic contact angle differed from the prescribed (static) one when other WBCs were used. For drop dewetting, Geom led to the most violent drop motion whereas CubSE caused the weakest motion; the initial contact line velocity was also found to be dependent on the WBC. For several problems, CubSE and SinSE gave almost the same results, and those by Geom and CI were close as well, possibly due to similar consideration in their design. Besides various comparisons, a new implementation that may be used for all WBCs was proposed to mimic the wall energy relaxation and control the degree of slip. This new procedure made it possible to allow the simulations to match experimental measurements well.
References in corpus (1)
Cited by in corpus (11)
- Lattice Boltzmann methods for multiphase flow and phase-change heat transfer
- Ternary free-energy entropic lattice Boltzmann model with high density ratio
- A family of single-node second-order boundary schemes for the lattice Boltzmann method
- Numerical Study of Drop Motion on a Surface with Wettability Gradient and Contact Angle Hysteresis
- Consistent and conservative phase-field based lattice Boltzmann method for incompressible two-phase flows
- A thermodynamically consistent and conservative diffuse-interface model for gas-liquid-solid multiphase flows
- Phase Field Simulation of Liquid Filling on Grooved Surfaces for Complete, Partial and Pseudo-partial Wetting Cases
- Bernaise: A flexible framework for simulating two-phase electrohydrodynamic flows in complex domains
- Towards the simplest simulation of incompressible viscous flows inspired by the lattice Boltzmann method
- A linear, second-order, energy stable, fully adaptive finite-element method for phase-field modeling of wetting phenomena
- An Alternative Method to Implement Contact Angle Boundary Condition on Immersed Surfaces for Phase-Field Simulations