Development of a microtpc detector as a standard instrument for low energy neutron field characterization
arXiv:1310.5923
Abstract
In order to measure energy and fluence of neutron fields, with energy ranging from 8 keV to 1 MeV, a new primary standard is being developed at the IRSN (Institute for Radioprotection and Nuclear Safety). This project, micro-TPC (Micro Time Projection Chamber), carried out in collaboration with the LPSC, is based on the nucleus recoil detector principle. The measurement strategy requires track reconstruction of recoiling nuclei down to a few keV, which can be achieved with a low pressure gaseous detector using a micro-pattern gaseous detector. A gas mixture, mainly isobutane, is used as a n-p converter to detect neutrons into the detection volume. Then electrons, coming from the ionization of the gas by the proton recoil, are collected by the pixelised anode (2D projection). A self-triggered electronics is able to perform the anode readout at a 50 MHz frequency in order to give the third dimension of the track. Then the scattering angle is deduced from this track using algorithms. The charge collection leads to the proton energy, taking into account the ionization quenching factor. This article emphasizes the neutron energy measurements of a monoenergetic neutron field produced at 127 keV. The measurements are compared to Monte Carlo simulations using realistic neutron fields and simulations of the detector response. The discrepancy between experiments and simulations is 5 keV mainly due to the calibration uncertainties of 10%.
arXiv commentNeudos12 symposium proceeding. 4 pages
References in corpus (5)
- Assessing the discovery potential of directional detection of Dark Matter
- Development of a front end ASIC for Dark Matter directional detection with MIMAC
- Three-dimensional track reconstruction for directional Dark Matter detection
- Ionization Quenching Factor Measurement of Helium 4
- A μ-TPC detector for the characterization of low energy neutron fields