Beating the classical limit: A diffraction-limited spectrograph for an arbitrary input beam

Abstract

We demonstrate a new approach to classical fiber-fed spectroscopy. Our method is to use a photonic lantern that converts an arbitrary (e.g. incoherent) input beam into N diffraction-limited outputs. For the highest throughput, the number of outputs must be matched to the total number of unpolarized spatial modes on input. This approach has many advantages: (i) after the lantern, the instrument is constructed from 'commercial off the shelf' components; (ii) the instrument is the minimum size and mass configuration at a fixed resolving power and spectral order (~shoebox sized in this case); (iii) the throughput is better than 60% (slit to detector, including detector QE of ~80%); (iv) the scattered light at the detector can be less than 0.1% (total power). Our first implementation operates over 1545-1555 nm (limited by the detector, a 640$\times$512 array with 20$\mu$m pitch) with a spectral resolution of 0.055nm (R~30,000) using a 1$\times$7 (1 multi-mode input to 7 single-mode outputs) photonic lantern. This approach is a first step towards a fully integrated, multimode photonic microspectrograph.

10 pages, 3 figures, accepted for publication in Opt. Express

References in corpus (3)

• GNOSIS: the first instrument to use fibre Bragg gratings for OH suppression
• First starlight spectrum captured using an integrated photonic micro-spectrograph
• Quantifying resolving power in astronomical spectra

Cited by in corpus (19)

• The Photonic Lantern
• Photonic Lantern
• An all-photonic focal-plane wavefront sensor
• Photonic spatial reformatting of stellar light for diffraction-limited spectroscopy
• Enhancing stellar spectroscopy with extreme adaptive optics and photonics
• Comb-calibrated solar spectroscopy through a multiplexed single-mode fiber channel
• Demonstration of an efficient, photonic-based astronomical spectrograph on an 8-m telescope
• Astrophotonics: molding the flow of light in astronomical instruments
• Efficient photonic reformatting of celestial light for diffraction-limited spectroscopy
• Multiplexed Single-Mode Wavelength-to-Time Mapping of Multimode Light
• Mode-Selective Photonic Lanterns with Double-Clad Fibers
• A Multi-Core Fibre Photonic Lantern Based Spectrograph for Raman Spectroscopy
• Multicore fibre technology - the road to multimode photonics
• 3D-M3: High-spatial resolution spectroscopy with extreme AO and 3D printed micro-lenslets
• Learning the Lantern: Neural network applications to broadband photonic lantern modelling
• Astrophotonics -- current capabilities and the road ahead
• Performance estimates for spectrographs using photonic reformatters
• Astrophotonic micro-spectrographs in the era of ELTs
• Seeking celestial Positronium with an OH-suppressed diffraction-limited spectrograph