A Simulation of the Optical Attenuation of TPB Coated Light-guide Detectors
arXiv:1307.6906 · doi:10.1088/1748-0221/8/10/C10015
Abstract
This note describes simple simulations which were performed in order to understand the attenuation behaviors of acrylic light-guides operated in air and argon, which were characterized in \cite{Baptista:2012bf}. Whilst these simulations are only at the level of sophistication of a toy model, they illustrate interesting non-exponential light attenuation effects and the differences between operating light-guide based detectors in argon and air environments. We investigate the effects of surface absorption, surface roughness and wavelength dependence, and use a model tuned on the light-guide attenuation curve measured in air to make a prediction of the light-guide attenuation curve in argon. This curve is compared with data from a liquid argon test stand, and an improvement over a simple exponential model is observed.
This note is a supplement to proceedings submitted for the Light Detection in Noble Elements (LIDINE 2013) conference. v2 updated in accord with referees comments