Characterization of 3D filament dynamics in a MAST SOL fluxtube geometry

Abstract

Non-linear simulations of filament propagation in a realistic MAST SOL flux tube geometry using the BOUT++ fluid modelling framework show an isolation of the dynamics of the filament in the divertor region from the midplane region due to three features of the magnetic geometry; the variation of magnetic curvature along the field line, the expansion of the flux tube and strong magnetic shear. Of the three effects, the latter two lead to a midplane ballooning feature of the filament, whilst the former leads to a ballooning around the X-points. In simulations containing all three effects the filament is observed to balloon at the midplane, suggesting that the role of curvature variation is sub-dominant to the flux expansion and magnetic shear. The magnitudes of these effects are all strongest near the X-point which leads to the formation of parallel density gradients. The filaments simulated, which represent filaments in MAST, are identified as resistive ballooning, meaning that their motion is inertially limited, not sheath limited. Parallel density gradients can drive the filament towards a Boltzmann response when the collisionalityof the plasma is low. The results here show that the formation of parallel density gradients is a natural and inevitable consequence of a realistic magnetic geometry and therefore the transition to the Boltzmann response is a consequence of the use of realistic magnetic geometry. The Boltzmann response causes the filament to self-organise and spin on an axis. The transition from interchange motion to the Boltzmann response occurs with increasing temperature through a decrease in collisionality. This is confirmed by measuring the correlation between density and potential perturbations within the filament, which is low in the anti-symmetric state associated with the interchange mechanism, but high in the Boltzmann regime.

28 pages, 9 figures

References in corpus (2)

• Scrape-off layer ion temperature measurements at the divertor target in MAST by retarding field energy analyser
• Ion energy measurements on MAST using a midplane RFEA

Cited by in corpus (17)

• 3D Simulations of Plasma Filaments in the Scrape Off Layer: A Comparison with Models of Reduced Dimensionality
• BOUT++: Recent and current developments
• Dynamics of 3D isolated thermal filaments
• The influence of temperature dynamics and dynamic finite ion Larmor radius effects on seeded high amplitude plasma blobs
• Quiescence near the X-point of MAST measured by high speed visible imaging
• The effects of shape and amplitude on the velocity of scrape-off layer filaments
• Interpretation of scrape-off layer profile evolution and first-wall ion flux statistics on JET using a stochastic framework based on filamentary motion
• Profile measurements in the plasma edge of MAST using a ball pen probe
• Numerical investigation of isolated filament motion in a realistic tokamak geometry
• Dirichlet boundary conditions for arbitrary-shaped boundaries in stellarator-like magnetic fields for the Flux-Coordinate Independent method
• Blob interaction in 2D scrape off layer simulations
• Blob dynamics in TORPEX poloidal null configurations
• Fluctuation characteristics of the TCV snowflake divertor measured with high speed visible imaging
• Transport Barrier and Spinning Blob Dynamics in the Tokamak Edge
• A novel flexible field-aligned coordinate system for tokamak edge plasma simulation
• Dynamics of rapidly spinning blob-filaments: fluid theory with a parallel kinetic extension
• Asymptotic-Preserving scheme for a strongly anisotropic vorticity equation arising in fusion plasma modelling